Skip to main content

Bridge improvements reduce flood threat

The impact of the new Eden Bridge over the River Eden on its flood plain is a key issue to the construction of the Carlisle Northern Development Route (CNDR).
February 16, 2012 Read time: 2 mins
A corrugated steel system from Tubosider UK was used for the culverts
The impact of the new Eden Bridge over the River Eden on its flood plain is a key issue to the construction of the Carlisle Northern Development Route (CNDR). The new 8.25km road is being built west of the city following the flooding of Carlisle in north-west England in 2005, and increased flood risk generally, The local study carried out by the 2759 Environment Agency in the wake of the 2005 floods recommended lowering the flood bank downstream by 1m and removing an old railway embankment to mitigate the future threat to Carlisle but placing added importance on the Eden plain's topography.

As a result of the flood modelling work carried out by 2762 Capita Symonds, the technical adviser managing the project for Cumbria County Council, the plan for the new bridge's northern embankment called for a series of culverts with a combined cross section of 160m².

Although the illustrative drawing featured a concrete hatched structure, design engineers Scott Wilson recommended the greater practicality and easier installation of a corrugated steel system as manufactured by 2580 Tubosider UK, also the providers of the most economical solution.

"Tubosider's bolted plate is 2309 Highways Agency-approved, sufficient to gain approval, and using its detailed plans for assembling each prefabricated component, all 15 culverts are now in place. The final solution was for ten large diameter structures of 6mm thickness and then five smaller ones of 4mm, all ranging in span from 3.32-4.46m.

It's a system 1486 Birse Civils has often used before," said design manager Bob Gibson of Birse Civils, contractors for the design and construction of the new road.

Due to open in early 2012, the CNDR will run from the A595 to M6 Junction 44 and is a £176 million (e200 million) public private partnership (PPP) concession contract run for Cumbria County Council by 1146 Balfour Beatty through its wholly-owned subsidiary Connect Roads. It will take traffic away from Carlisle centre and improve links between west Cumbria, Scotland and the north-east of England. As winning bidder, Balfour Beatty also takes control of 150km of existing road network and will maintain this for a period of 30 years.

For more information on companies in this article

Related Content

  • New Clyde bridge project
    March 12, 2021
    A New Clyde bridge project is going ahead.
  • Highway installation
    February 6, 2012
    In the UK a civil engineering firm is using Wacker Neuson's novel vertical digging system (VDS) on a major contract to up-grade the motorway communication network alongside the M6. The Highways Agency contract involves work along a total of 64km between junctions 32 and 37 and McDermott Construction, together with sister company McFour, has been tasked by main contractor Peek Communications to open a 960mm deep x 410mm wide trench and install large termination boxes every 500m. The job involves bedding four
  • UK motorway upgrade underway
    December 14, 2015
    A fleet of Hitachi short-tailswing excavators have been working on the M3 smart motorway project in the counties of Hampshire and Surrey in England. Eight ZX135US-5 and ZX225USLC-5 excavators owned by Skyland Drainage Contractors, and a further two ZX225USLC-5s owned by Davey Civils, have been employed on the subcontractors’ drainage works. Having previously hired Zaxis excavators, Kent-based Davey Civils has been a Hitachi customer for one year. Both models were supplied with service contracts from Hita
  • UK transport secretary approves new Sunderland bridge project
    November 2, 2012
    UK Transport Secretary Patrick McLoughlin has approved a planning inspector's report for a new bridge across the Wear in Sunderland. Four firms, reported to be Balfour Beatty, Ferrovial, Graham Construction and Vinci, have been shortlisted for the US $ 200 million (£120mn) project. The tendering process is expected to take six months, suggesting construction could start in spring 2013. The bridge will take around three years to complete. The new crossing, from Castletown to Pallion, will be the tallest brid