Skip to main content

Bridge improvements reduce flood threat

The impact of the new Eden Bridge over the River Eden on its flood plain is a key issue to the construction of the Carlisle Northern Development Route (CNDR).
February 16, 2012 Read time: 2 mins
A corrugated steel system from Tubosider UK was used for the culverts
The impact of the new Eden Bridge over the River Eden on its flood plain is a key issue to the construction of the Carlisle Northern Development Route (CNDR). The new 8.25km road is being built west of the city following the flooding of Carlisle in north-west England in 2005, and increased flood risk generally, The local study carried out by the 2759 Environment Agency in the wake of the 2005 floods recommended lowering the flood bank downstream by 1m and removing an old railway embankment to mitigate the future threat to Carlisle but placing added importance on the Eden plain's topography.

As a result of the flood modelling work carried out by 2762 Capita Symonds, the technical adviser managing the project for Cumbria County Council, the plan for the new bridge's northern embankment called for a series of culverts with a combined cross section of 160m².

Although the illustrative drawing featured a concrete hatched structure, design engineers Scott Wilson recommended the greater practicality and easier installation of a corrugated steel system as manufactured by 2580 Tubosider UK, also the providers of the most economical solution.

"Tubosider's bolted plate is 2309 Highways Agency-approved, sufficient to gain approval, and using its detailed plans for assembling each prefabricated component, all 15 culverts are now in place. The final solution was for ten large diameter structures of 6mm thickness and then five smaller ones of 4mm, all ranging in span from 3.32-4.46m.

It's a system 1486 Birse Civils has often used before," said design manager Bob Gibson of Birse Civils, contractors for the design and construction of the new road.

Due to open in early 2012, the CNDR will run from the A595 to M6 Junction 44 and is a £176 million (e200 million) public private partnership (PPP) concession contract run for Cumbria County Council by 1146 Balfour Beatty through its wholly-owned subsidiary Connect Roads. It will take traffic away from Carlisle centre and improve links between west Cumbria, Scotland and the north-east of England. As winning bidder, Balfour Beatty also takes control of 150km of existing road network and will maintain this for a period of 30 years.

For more information on companies in this article

Related Content

  • Upgrading a busy A road link in the UK
    July 4, 2018
    The upgrade to the UK’s busy A14 route will address a significant traffic bottleneck - Mike Woof writes The UK is suffering badly from traffic congestion, a problem that is particularly severe in and around its major cities. Lack of investment in road construction over many years has resulted in a major backlog of work, while the country has seen growing vehicle numbers. To make matters worse, there have been few additions to the major road network since the late 1980s and early 1990s. And the combinatio
  • Speeding repairs of concrete motorway
    April 2, 2014
    A novel technique is now being introduced in the UK that can help cut construction costs, as well as the time needed for road repairs. Connect Plus, the company that finances, operates and upgrades the 400km M25 network on behalf of the UK’s Highways Agency, has pioneered an innovative method for the replacement of life-expired concrete motorway The introduction of this method is helping reduce the delays experienced by drivers by as much as 80% in the sections of road where it is now being implemented.
  • Upgrades planned for key UK link
    July 14, 2014
    Work is now to go ahead on upgrading a key stretch of the A21 road in the UK. Contractor Balfour Beatty will handle the work to widen a stretch of the A21 between Tonbridge and Pembury and also improve the road, with it becoming a dual carriageway. The €87.55 million (£69.7 million) scheme forms part of a plan by the UK Government for a series of road improvements of €30.15 billion (£24 billion) by 2021. Advance work is expected to start in the third quarter of this year with the main construction activity
  • Bangladesh elevated expressways moving ahead
    July 17, 2017
    New elevated expressways will improve transport in Bangladesh. The Asian Development Bank (ADB) is providing US$1.2 billion in financing for the new Dhaka-Northwest international project. This will be managed by the country’s Roads and Highways Department under the Road Transport and Bridges Ministry's Road Transport and Highways Division.