Skip to main content

Tunnel driven by TBM

A major tunnel drive has been carried out by a TBM in Italy.
By MJ Woof August 7, 2020 Read time: 2 mins
A TBM built by Herrenknecht has set new records for its tunnel drive in Italy

The largest tunnel boring machine (TBM) ever used successfully in Europe has now completed its drive in Italy. The earth pressure balance (EPB) shield TBM features a diameter of 15.87m and was built by Herrenknecht in Schwanau, Southern Germany.

The TBM bored 7,551m for a new highway tunnel through the Italian Apennines. In cooperation with the customer, Herrenknecht designed a new system for the machine, to protect particularly the site crew from the expected methane gas deposits in the ground.

The machine was configured to the specifications of the customer, Pavimental. Working with the contractor, the Herrenknecht team tailored the TBM to the requirements of the project. A key feature was the warning and protection system to reliably protect the site crew against methane gas deposits predicted underground during the advance.

The large three-lane Santa Lucia tunnel newly excavated by the Herrenknecht EPB Shield is a key section of the new A1 highway route between Bologna and Florence. This will replace the old and winding highway with its dangerous curved. The tunnel will reduce the risk of crashes as well as travel times and the fuel consumption the thousands of vehicles that will use the link each day.

Following 12 months of design and assembly, the EPB Shield was ready at Herrenknecht in Schwanau for acceptance by the contractor and representatives of the client, Autostrade per l’Italia.

After the start of tunnelling in July 2017, the Pavimental miners drove up to 122m of tunnel/week through the Apennine mountain range with the 4,800tonne machine. During the long drive over 7.5km, the EPB machine with its large diameter of 15.87 meters excavated a total of around 1.5 million m3 of soil and rock. The TBM has a shield diameter of 15,870mm, an installed power of 8,750kW and was used in geological conditions featuring limestone, marl, siltstone, shale and sandstone.

With the production of the Santa Lucia machine, Herrenknecht beat the existing European record for TBM diameter of 15.55m. It had been held since 2010 by the Herrenknecht EPB Shield for the Sparvo tunnel, also for the expansion of the A1 motorway in Italy.

For more information on companies in this article

Related Content

  • Sandvik the key to Raj Stones crushing success
    May 15, 2014
    Raj Stones, based in Fujairah in the United Arab Emirates, is said to have seen its aggregates production increase through the use of a Sandvik Construction CH660 cone crusher. Guy Woodford reports As an operator of one of the larger quarries in the UAE, Raj Stones has used a wealth of Sandvik technology to help reinforce its position as one of the premier aggregate suppliers in the region, now exporting material to Qatar, as well supplying the growing Emirates construction industry. At the heart of t
  • Faroes: NCC careful of Sandoy Tunnel work around St Magnus Cathedral
    March 17, 2020
    NCC is careful to not disturb the 800-year old St Magnus Cathedral on Sandoy Island.
  • Samoter-Asphaltica 2014 sparks greater Italian optimism
    July 3, 2014
    The recent co-located Samoter and Asphaltica exhibitions at VeronaFiere in Verona, Italy, have been hailed a success by organisers, exhibiting companies and trade delegations, after more than 40,000 visitors, including thousands from outside Italy, attended the combined 445 exhibitor company-strong four-day events. There is no doubt, as Guy Woodford reports, they provided a timely boost to an Italian construction equipment manufacturing sector enduring tough times
  • Develon launches new tunnelling excavator
    February 20, 2025

    Develon has launched the DX235RTF-7 tunnelling excavator, an extension to the company’s line-up of special application machines.

    The DX235RTF-7 is based on Develon’s well-established DX235LCR-7 reduced radius crawler excavator and is powered by a DL06V Stage V engine, providing 141kW of power. The DX235RTF-7 uses the successful compact design and minimum swing radius of the DX235LCR-7. However, the key part of the machine is the heavy duty tunnelling front, offering a new arm and boom design with special kinematics and a tilting function.