Sweden’s Tjörnbron Bridge to get replacement cables

SwedenSwedish contractor Svevia has been commissioned by the Swedish Transport Administration (Trafikverket) to handle cable replacements on the Tjörnbron Bridge. Replacement is expected to start in 2019 for completion by 2025. Svevia project manager Johan Söderberg said the work will be complicated, not least because traffic must continue to us the bridge. He reportedly said that much of the work will have to take place at night, in the summer and in good weather. The 664m-long cable stayed Tjörn Bridge,
May 30, 2018 Read time: 2 mins
Cable that: the Tjörnbron Bridge, Sweden: (photo: Arild Vågen)

Swedish contractor 6535 Svevia has been commissioned by the Swedish Transport Administration (Trafikverket) to handle cable replacements on the Tjörnbron Bridge.

Replacement is expected to start in 2019 for completion by 2025. Svevia project manager Johan Söderberg said the work will be complicated, not least because traffic must continue to us the bridge. He reportedly said that much of the work will have to take place at night, in the summer and in good weather.

The 664m-long cable stayed Tjörn Bridge, together with two smaller bridges, connects Stenungsund on mainland Sweden with the island Tjörn. Span width is 366m and height above the water is 45m.

The Tjörn Bridge was opened in 1981 after its predecessor, the Almö Bridge, built in 1960, collapsed after the cargo ship Star Clipper collided with its span in January 1980 in fog and darkness. Eight people died in seven vehicles that plunged into the sea.

In a book analysing bridge failures, author Bjorn Akesson, a Swedish consulting engineer, noted that many factors contributed to the ship being in the wrong trajectory as it swept under the old bridge. The bridge’s design, he suggested, did not allow sufficient clear passage for a large vessel, creating a high risk of an accident occurring.

Road Structures

For more information on companies in this article

Related Content

  • Almost gone: Canada’s old Port Mann Bridge deconstructed
    August 14, 2015
    Three years ago a welder’s cut halved Canada’s old Port Mann Bridge. David Arminas reports from the banks of the Fraser River. By the time this issue of World Highways reaches you, one of Canada’s iconic steel arch bridges will be a shadow of its former self. It’s been a three-year demolition job since the first cut across the deck of the old Port Mann Bridge just outside the city of Vancouver on Canada’s Pacific coast. A new 10-lane 2.2km Port Mann Bridge opened in 2012 (see box). It runs parallel to the o
    Read More
  • Towers of power: California’s Gerald Desmond Bridge Replacement
    May 8, 2019
    Challenging ground conditions meant a design rethink - and some engineering firsts - for California’s Gerald Desmond Bridge Replacement Project* The Port of Long Beach on Terminal Island south of Los Angeles is the second-busiest container port in the US. It handles around 15% of all imported goods, much of it with Asia. As the Port of Long Beach was growing in importance over the past half century, the 51-year-old Gerald Desmond Bridge has faithfully been delivering thousands of daily commuters to wo
    Read More
  • Doubts over a Helsingør-Helsingborg link
    April 14, 2021
    Danish minister questions feasibility of a road-rail tunnel between the Danish and Swedish cities.
    Read More
  • Italy’s Morandi Bridge collapses killing at least 35
    August 15, 2018
    Investigators and rescuers in the northern Italian city of Genoa are scouring the wreckage of a cable stayed motorway bridge that collapsed, killing at least 35 people. A tower collapsed and then a 209m section – the longest - plummeted to the river and train tracks below at around 11:30 during heavy rain, media sources said. One truck driver managed to stop only metres from the edge of the missing section of bridge. "It was just after 11:30 when we saw lightning strike the bridge," an eyewitness was quote
    Read More

Highlighted Content