Skip to main content

STRABAG wins contract for Hamburg, Germany

STRABAG has won a major highway contract in Hamburg, Germany.
By MJ Woof August 26, 2020 Read time: 3 mins
Hamburg is to benefit from a major highway upgrade being carried out by STRABAG

STRABAG has won a major contract in Germany to widen the country’s longest highway viaduct to eight lanes. The project is to widen and rehabilitate the Hochstraße Elbmarsch A7 motorway viaduct (K20) in Hamburg.

The work will be carried out by a consortium comprising STRABAG Subdivision Bridge Construction and Subdivision North. The contract was awarded by the German motorway planning and construction company DEGES and the deal is worth over €200 million.

Work on the 3.84km long section is to be completed by 2027.

The elevated Hochstraße Elbmarsch section of the A7 begins a few hundred metres after the exit from the Elbe Tunnel heading south, passes over Rugenberg Port, crosses two railway lines and eleven roads and paths in the Hamburg city limits, and ends at the Hamburg-Hausbruch motorway exit.

STRABAG is currently carrying out the detailed design; at the same time, work has already begun on site installation, demolition and removal, and deep foundation. The aim of the work is to improved traffic flow on central north-south link.

“We are delighted to have been awarded this major German infrastructure project and are gratified by the confidence placed in the capabilities of our infrastructure construction teams. The widening of this busy section of the A7 motorway will improve the traffic flow on Germany’s central north-south link in the long term,” said Thomas Birtel, CEO of STRABAG SE. The daily volume of traffic on this section of the A7 motorway has increased to between 50,000 and 60,000 vehicles in each direction since the construction of the elevated road 45 years ago. STRABAG Subdivision Bridge

The option to widen the viaduct had already been planned for and prepared when the elevated road was built in 1975. The foundations in the port area and the connecting reinforcements on the inner sides of the bridge superstructures, structurally separated for both directions of travel, can now be used for the planned upgrade. The fourth lane will be added to the inner side of each viaduct, bringing the two sections of the A7 closer together. Traffic is to be disrupted as little as possible during the construction work. The widening will be carried out in steps to allow traffic to continue to flow along three lanes in both directions at all times.

The upgrade will begin on the carriageway in the direction of Flensburg (north), with work scheduled for completion by mid-2024. This will be followed by the start of the second phase, the widening to four lanes of the carriageway in the direction of Hanover (south). Three further STRABAG Group entities are also involved in this project: STRABAG Business Unit Hamburg (road construction), Züblin Stahlbau GmbH (steel girders) and Zentrale Technik Hamburg (planning).

The widening of the Hochstraße Elbmarsch elevated road will involve the use of around 19,200m³ of concrete. In addition, 15km of steel railing will have to be renewed. The rehabilitation of the roadway will require the removal of asphalt and waterproofing over an area of 135,000m² and the laying of new asphalt over an area of 155,000m².

For more information on companies in this article

Related Content

  • Road widening means bridge demolition
    February 24, 2012
    Two heavy Atlas Copco hydraulic breakers have been used to demolish a bridge on the A40 autobahn at Junction 28 in Gelsenkirchen-Süd, Germany. The bridge was used to carry the four lanes of the A40 over the B277 main road. As the key route in the Ruhr district, the A40 is being widened to incorporate six lanes, so the old bridge needed to be demolished.
  • BESIX-MTH awards Nordhavn work to Bravida
    February 5, 2024
    Bravida Denmark, on behalf of the BESIX-MTH joint venture, will install plumbing, electricity, ventilation, road lighting and light signals for Copenhagen’s Nordhavn Tunnel.
  • Doka delivers cantilevering for super-slim piers at Lahntal Bridge
    October 21, 2016
    Doka’s formwork expertise is currently in demand during the construction of one of the busiest motorway viaducts in Germany. The 400m six-lane Lahntal Bridge in Limburg dates from the early 1960s. Every day about 100,000 vehicles cross the bridge that spans the valley of the River Lahn. But traffic loads have increased sharply, so a new bridge is being built sited just a few metres west of the old viaduct. The new Lahntal viaduct will measure a massive 43.5m in width, enabling eight lanes plus hard shoul
  • The UK’s A14 route is seeing a major upgrade
    June 14, 2018
    Work is progressing well on the project to upgrade the busy A14 route in the UK. A major milestone has been achieved with and important phase of the bridge installation having taken place. A 39m viaduct beam has been placed successfully for the bridge, which spans the River Ouse in Cambridgeshire. A key role in this work has been taken by the firm Cleveland Bridge UK. As part of Highways England’s £1.5 billion A14 Cambridge to Huntingdon improvement scheme, Cleveland Bridge was contracted by the A14 Integr