First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

Road Structures

For more information on companies in this article

Related Content

  • New president and CEO for Hitachi Construction Machinery (Europe)
    April 17, 2012
    Hitachi Construction Machinery (Europe) has a new president and CEO in Moriyaki Kadoya, who started at HCME at the beginning of April, 2012. This is the second time that he has worked for the manufacturer in Europe. Speaking at the launch of seven new machines on the firm’s INTERMAT exhibition stand, Mr Kadoya said the European market remains important for Hitachi, with signs of recovery in many countries.
    Read More
  • INTERMAT launch for Merlo stability control
    January 6, 2017
    Following the successful integration of CDC Dynamic Load Control management in its agricultural telehander range, Merlo is introducing the technology to its construction models at INTERMAT The system is an advanced method of load management, and effectively places a real-time image of the handler’s load chart on a colour screen in the cab, showing the weight and position of the load on the chart, at all times.
    Read More
  • INTERMAT launch for Merlo stability control
    March 16, 2012
    Following the successful integration of CDC Dynamic Load Control management in its agricultural telehander range, Merlo is introducing the technology to its construction models at INTERMAT The system is an advanced method of load management, and effectively places a real-time image of the handler’s load chart on a colour screen in the cab, showing the weight and position of the load on the chart, at all times.
    Read More
  • Cummins launches SCR only Stage IV/Tier 4 engines
    January 6, 2017
    Cummins used bauma to reveal the QSF3.8 – a four-cylinder engine platform delivering a power range of 63-89kW – which is ready to meet Stage IV/Tier 4 Final emissions regulations. Using only SCR for its exhaust after-treatment process, the QSF3.8 avoids the need for either DOC or DPF as a result of using a high-efficiency catalyst to convert oxides of nitrogen at lower exhaust temperatures while requiring only low doses of DEF, said the company.
    Read More

Highlighted Content