Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • Atlas Weyhausen introduces its biggest wheeled loader yet
    January 6, 2017
    Atlas Weyhausen has unveiled its biggest and most powerful wheeled loader yet – the AR 105e – which boasts a service weight of 9,450kg and a standard bucket capacity between 1.6 and 1.8m³. The AR 105e’s engine is a water-cooled Deutz Diesel motor TCD 4.1 with four in-line cylinders, an output of 105 kW@2,200rpm and a maximum torque of 550Nm. The motor is turbocharged, with charge cooling and external cooling of recycled exhaust gases. The modular system of exhaust after-treatment meets the demands of EU sta
  • Atlas Weyhausen introduces its biggest wheeled loader yet
    April 18, 2013
    Atlas Weyhausen has unveiled its biggest and most powerful wheeled loader yet – the AR 105e – which boasts a service weight of 9,450kg and a standard bucket capacity between 1.6 and 1.8m³. The AR 105e’s engine is a water-cooled Deutz Diesel motor TCD 4.1 with four in-line cylinders, an output of 105 kW@2,200rpm and a maximum torque of 550Nm. The motor is turbocharged, with charge cooling and external cooling of recycled exhaust gases. The modular system of exhaust after-treatment meets the demands of EU sta
  • Nylacast-engineered polymers are self-lubricating and offer high resistance to abrasion
    January 6, 2017
    Nylacast offers an extensive range of polymer solutions for OEMs when it comes to sourcing alternative lightweight wear parts and components. Using CAD/CAM technology, the company offers customers an in-house design service that includes material selection advice, service and support for producing self-lubricating materials with high-impact strength and high resistance to abrasion while remaining light in weight. Nylacast said its components are 86% lighter than the equivalent component manufactured from st
  • Nylacast-engineered polymers are self-lubricating and offer high resistance to abrasion
    April 18, 2013
    Nylacast offers an extensive range of polymer solutions for OEMs when it comes to sourcing alternative lightweight wear parts and components. Using CAD/CAM technology, the company offers customers an in-house design service that includes material selection advice, service and support for producing self-lubricating materials with high-impact strength and high resistance to abrasion while remaining light in weight. Nylacast said its components are 86% lighter than the equivalent component manufactured from st