First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

Road Structures

For more information on companies in this article

Related Content

  • JTD aims for six Jakarta toll roads to start in 2015
    October 31, 2014
    Jakarta Tollroad Development (JTD) has said it aims to start construction of the six Jakarta inner city toll roads in the middle of next year. The project, nearly 70km in total and much of it elevated, is at the detailed engineering design stage. The toll roads will connect all five of Jakarta’s municipalities. The first construction stage involving the Semanan-Sunter-Pulogebang toll road is expected to US$1.20 billion. Total cost for the whole project is estimated at up to $3.2 billion. According to
    Read More
  • Hitachi Zaxis 5 wheeled excavators deliver performance
    January 6, 2017
    Hitachi Construction Machinery is showing four models from its Zaxis 5 range of wheeled excavators. The ZX140W-5, ZX170W-5, ZX190W-5 and ZX220W-5 all feature Isuzu Stage IIIB emissions-compliant engines powering the HIOS III hydraulic system. They benefit from increased lifting capacities, as the power boost function has been increased by 11%. The machines have a revised ROPS cab that has been redesigned to improve visibility. A new monitor sits on the right-hand pillar with a rear-view camera providing vis
    Read More
  • Hitachi Zaxis 5 wheeled excavators deliver performance
    April 16, 2013
    Hitachi Construction Machinery is showing four models from its Zaxis 5 range of wheeled excavators. The ZX140W-5, ZX170W-5, ZX190W-5 and ZX220W-5 all feature Isuzu Stage IIIB emissions-compliant engines powering the HIOS III hydraulic system. They benefit from increased lifting capacities, as the power boost function has been increased by 11%. The machines have a revised ROPS cab that has been redesigned to improve visibility. A new monitor sits on the right-hand pillar with a rear-view camera providing vis
    Read More
  • Liebherr adds TA240 to ADT line-up
    January 6, 2017
    Liebherr has added a second model to its articulated hauler range with the TA240. The 40 tonne capacity truck has a 27m3 body and a 6x6 driveline. Power comes from a 16.2 litre Stage IIIB Liebherr V8 diesel engine delivering 350kW (476hp). This enables the truck to reach maximum speeds of up to 57km/h. A high performance retarder helps to bring the truck to a halt and can be preselected, with both the engine brake and the retarder working as soon as the driver lifts their foot from the throttle pedal. Wet,
    Read More

Highlighted Content