Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • New emission compliant dozers are offered by Dressta
    January 6, 2017
    Dressta is now offering versions of its well-proven bulldozer range equipped with Tier 4 Interim/Stage IIIB emission compliant engines. The TD-25, TD-20, TD-15 and TD-14 class dozers will all be available with Tier 4 Interim/Stage IIIB emission rated diesels during 2013. The company says that its TD-10, TD-9, TD-8 and TD-7 bulldozers will be available with Tier 4 Interim/Stage IIIB engines in 2014, while these models will also be revamped with new hydrostatic drivelines. The TD-40 and TD-25 will remain avai
  • New emission compliant dozers are offered by Dressta
    February 7, 2013
    Dressta is now offering versions of its well-proven bulldozer range equipped with Tier 4 Interim/Stage IIIB emission compliant engines. The TD-25, TD-20, TD-15 and TD-14 class dozers will all be available with Tier 4 Interim/Stage IIIB emission rated diesels during 2013. The company says that its TD-10, TD-9, TD-8 and TD-7 bulldozers will be available with Tier 4 Interim/Stage IIIB engines in 2014, while these models will also be revamped with new hydrostatic drivelines. The TD-40 and TD-25 will remain avai
  • Verco buckets up to extreme condition mining
    January 6, 2017
    Verco has been supplying buckets for mining in extreme conditions for more than 25 years. Proud members of the HARDOX WEARPARTS network, and with products boasting the logo HARDOX IN MY BODY, Verco specialises in the production of bucket for big excavators and wheeled loaders. The firm also produces wear parts, liners for crushers and recycling equipment.
  • Verco buckets up to extreme condition mining
    April 9, 2013
    Verco has been supplying buckets for mining in extreme conditions for more than 25 years. Proud members of the HARDOX WEARPARTS network, and with products boasting the logo HARDOX IN MY BODY, Verco specialises in the production of bucket for big excavators and wheeled loaders. The firm also produces wear parts, liners for crushers and recycling equipment.