Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • Komatsu Europe is building on its customer relationships
    January 6, 2017
    Komatsu Europe is keen to develop its customer base in developed markets by using ideas like the diesel particulate filter (DPF) exchange programme. New Komatsu Europe managing director and CEO Keiko Fujiwara explained, “When we introduced the Stage IIIB models a lot of customers were concerned about initial costs and the care required for the DPF. That’s why we decided this exclusively for our Stage IIIB customers.”
  • Komatsu Europe is building on its customer relationships
    April 19, 2012
    Komatsu Europe is keen to develop its customer base in developed markets by using ideas like the diesel particulate filter (DPF) exchange programme. New Komatsu Europe managing director and CEO Keiko Fujiwara explained, “When we introduced the Stage IIIB models a lot of customers were concerned about initial costs and the care required for the DPF. That’s why we decided this exclusively for our Stage IIIB customers.”
  • Versatile and efficient, Sennebogen’s new port crane offers high performance
    January 6, 2017
    Sennebogen’s 875 E-Series crane is said to offer a high materials handling capacity, with low energy requirements and operating costs. Efficiency has been increased due to a new energy recovery system. Various gantry or pylon solutions and variable cabin elevation features are available. This materials handling machine has an operating weight of up to 150tonnes and is suited for port handling and industrial applications. A newly developed energy recovery cylinder is being implemented for the first time. The
  • Versatile and efficient, Sennebogen’s new port crane offers high performance
    March 27, 2013
    Sennebogen’s 875 E-Series crane is said to offer a high materials handling capacity, with low energy requirements and operating costs. Efficiency has been increased due to a new energy recovery system. Various gantry or pylon solutions and variable cabin elevation features are available. This materials handling machine has an operating weight of up to 150tonnes and is suited for port handling and industrial applications. A newly developed energy recovery cylinder is being implemented for the first time. The