Skip to main content

First deck span completed for Mersey Gateway's north approach viaduct

The Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed. The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.
February 12, 2016 Read time: 2 mins

The 6126 Mersey Gateway Project achieved another milestone as the first deck span for the elevated north approach viaduct was completed.

The reinforced concrete deck span was revealed when Merseylink's movable scaffolding system (MSS) 'Trinity' moved to its second casting position. It is the first of 11 spans that will be cast by the MSS for the deck of the elevated approach viaduct on the north side of the River Mersey.

The MSS, which acts as a giant concrete mould, was specially designed for the Mersey Gateway Project. It is being used to build the two elevated approach viaducts over the Mersey estuary.

The span connects the beginning of the approach viaduct from the north abutment in Widnes to the first supporting pier. It measures around 60m long and 18m wide and is angled at 5 degrees to allow vehicles to travel safely around the curve of the approach road.

Construction teams worked around the clock to get the span ready. This involved pouring 1,146m3 of concrete into the MSS non-stop over 34 hours.


"This is a real achievement for the project and a milestone that we've been looking forward to with anticipation,” said Declan Cannar, Merseylink's general foreman in charge of the MSS operation. “We're now busy preparing the MSS so it's ready to cast the next section."

The approach viaduct deck is being constructed in three phases. The deck spans are constructed first by the MSS, then a deck slab is built on top of the span, and finally the outer deck or ‘wings' are built by a wing traveller machine to provide the full six lane width of the approach road.

The MSS has moved to its second casting position ready for work to begin on the next span, which will be cast in March.

View Trinity in action by clicking here.
%$Linker: 2 External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 oLinkExternal www.merseygateway.co.uk/live-view Visit www.merseygateway.co.uk/live-view false http://www.merseygateway.co.uk/live-view false false%>

For more information on companies in this article

Related Content

  • Rockmore International brings A-series hammers to bauma
    April 19, 2013
    Rockmore International introduced its new A-series down-the-hole (DTH) hammers at bauma. The ROK 600A and 650A have been added to the company’s ROK range of hammers. The new 6inch-class (152mm) DTH hammers are the first models in the new A-class series. The A hammers feature new component designs that are said to demonstrate better performance and penetration rates suited to smaller compressors. “We are committed to developing new DTH hammer solutions that increase productivity and reduce drilling operatin
  • Innovative vacuum trailer system from D-TEC
    January 6, 2017
    Netherlands-based D-TEC has developed a novel vacuum tank trailer system for applications such as bentonite extraction during sample boring. An innovative steering system is said to allow the D-TEC vacuum tanktrailer to manoeuvre easily on sites where there is little space. This design also reduces tyre scrubbing and allows greater tyre life, cutting running costs over the long term. The tank trailer offers greater load capacity than previously available designs according to the firm, due to its low weight,
  • Innovative vacuum trailer system from D-TEC
    January 30, 2013
    Netherlands-based D-TEC has developed a novel vacuum tank trailer system for applications such as bentonite extraction during sample boring. An innovative steering system is said to allow the D-TEC vacuum tanktrailer to manoeuvre easily on sites where there is little space. This design also reduces tyre scrubbing and allows greater tyre life, cutting running costs over the long term. The tank trailer offers greater load capacity than previously available designs according to the firm, due to its low weight,
  • CDE to unveil new Evowash sand washing plant
    February 12, 2013
    Following an extensive research and development programme CDE Global unveils its next generation EvoWash sand washing plant, a compact sand washing system integrating a dewatering screen, sump and hydrocyclone configuration which is customised to the specific requirements of the materials washing project on which it is specified. “Our 2013 EvoWash will include some significant design changes which will further enhance its position as the premium compact sand washing plant on the global market,” says Kevin