Skip to main content

Demolition starts on Seattle’s Alaska Way Viaduct

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle is underway, including the filling in of a redundant road tunnel.
June 14, 2019 Read time: 2 mins
Coming down: Demolition of Seattle’s Alaska Way Viaduct, a 1950’s structure, began this winter (pic courtesy Philip Renaud)

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle in Washington State is underway, including the filling in of a redundant road tunnel.

Demolition contractor Kiewit Infrastructure West picked up the contract estimated at around US$94 million, according to media reports. Work is expected to take up to two years and includes filling in the Alaska Way’s Battery Street Tunnel.

For each segment of the viaduct, the contractor is removing the road decks, then girders and crossbeams and finally the support columns. During demolition, barriers are installed to protect nearby buildings and water is sprayed on the work to keep down dust.

Tunnel work includes decommissioning and removing the utility and mechanical systems, removal of hazardous material from the tunnel and, when finished, the sealing of the two entrances.

Kiewit decided against using conveyor belts to move the material into the Battery Street Tunnel. Instead, rubble is trucked to a nearby sorting area where rebar is removed. The material is crushed into small piece and loaded onto side-dumping trucks that carry the debris to openings along the tunnel route that lead directly down into the tunnel itself. The trucks dump the material into a steel funnel over the openings and down it goes into the tunnel. It takes less than a minute for the material to crash down into the tunnel where it is then levelled out by workers. Vibratory rollers spread and compact the material in layers.

Prior to the demolition work, there were public petitions to keep the Battery Street Tunnel open for pedestrian and bicycle use. However, the Washington State Department of Transportation decided that the structure, in need of repair,  would have been extremely expensive to upgrade to modern seismic standards – an important feature for any structure along the west coast of the US and up into Canada. The region lies along the infamous San Andreas Fault making it prone to earthquakes.

The new Alaska Way’s tunnel lies directly under the old viaduct and was the subject of a World Highways Key Project Report in 2017.

<%$Linker:

2

External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false false%>

 

Related Content

  • Buckets of innovation
    January 6, 2017
    The lower angle of Caterpillar Work Tools’ new line of buckets for the E-series Hydraulic Excavators are said to concentrate the power of the machine across a smaller surface, offering less resistance to the material flow into and around the bucket resulting in a smoother and faster dig cycle. In addition, ‘Tip forward’ - the tip position that opens up the mouth of the bucket and lengthens the floor - has been moved towards the operator. This is said to improve both material flow into the bucket and visibi
  • Buckets of innovation
    April 12, 2012
    The lower angle of Caterpillar Work Tools’ new line of buckets for the E-series Hydraulic Excavators are said to concentrate the power of the machine across a smaller surface, offering less resistance to the material flow into and around the bucket resulting in a smoother and faster dig cycle. In addition, ‘Tip forward’ - the tip position that opens up the mouth of the bucket and lengthens the floor - has been moved towards the operator. This is said to improve both material flow into the bucket and visibi
  • Trakpactor 320SR impact crusher from Powerscreen
    January 28, 2014
    Powerscreen’s new Trakpactor 320SR mid-sized horizontal impact crusher, sporting the rugged new look from the company, which maintains the traditional Powerscreen green colour while adopting a dark grey colour on the chassis and conveyors, is unveiled at CONEXPO-CON/AGG. The Trakpactor 320SR is redesigned with some key enhancements to offer operators and contractors excellent reduction and high consistency of product shape for performance in quarry and recycling applications. “The plant is capable of wo
  • Terex and the New Power Generation
    January 6, 2017
    Terex’s new TA300 Generation 9 Articulated Dump Truck being launched at Intermat 2012 is said to have an independent front suspension providing a smooth ride at fast speeds, resulting in greater operator comfort and productivity.