Skip to main content

Demolition starts on Seattle’s Alaska Way Viaduct

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle is underway, including the filling in of a redundant road tunnel.
June 14, 2019 Read time: 2 mins
Coming down: Demolition of Seattle’s Alaska Way Viaduct, a 1950’s structure, began this winter (pic courtesy Philip Renaud)

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle in Washington State is underway, including the filling in of a redundant road tunnel.

Demolition contractor Kiewit Infrastructure West picked up the contract estimated at around US$94 million, according to media reports. Work is expected to take up to two years and includes filling in the Alaska Way’s Battery Street Tunnel.

For each segment of the viaduct, the contractor is removing the road decks, then girders and crossbeams and finally the support columns. During demolition, barriers are installed to protect nearby buildings and water is sprayed on the work to keep down dust.

Tunnel work includes decommissioning and removing the utility and mechanical systems, removal of hazardous material from the tunnel and, when finished, the sealing of the two entrances.

Kiewit decided against using conveyor belts to move the material into the Battery Street Tunnel. Instead, rubble is trucked to a nearby sorting area where rebar is removed. The material is crushed into small piece and loaded onto side-dumping trucks that carry the debris to openings along the tunnel route that lead directly down into the tunnel itself. The trucks dump the material into a steel funnel over the openings and down it goes into the tunnel. It takes less than a minute for the material to crash down into the tunnel where it is then levelled out by workers. Vibratory rollers spread and compact the material in layers.

Prior to the demolition work, there were public petitions to keep the Battery Street Tunnel open for pedestrian and bicycle use. However, the Washington State Department of Transportation decided that the structure, in need of repair,  would have been extremely expensive to upgrade to modern seismic standards – an important feature for any structure along the west coast of the US and up into Canada. The region lies along the infamous San Andreas Fault making it prone to earthquakes.

The new Alaska Way’s tunnel lies directly under the old viaduct and was the subject of a World Highways Key Project Report in 2017.

<%$Linker:

2

External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false false%>

 

Related Content

  • FRD adds crushers and shears to demolition attachment range
    February 7, 2013
    Furukawa Rock Drill (FRD) is extending its hydraulic attachment line-up with additional V Series jaw crushers and shears. The company has extended its VM Series of rotating crushers from two to seven models, now suitable for excavators of 12-100 tonnes operating weight. In addition FRD will offer the VS Series of secondary demolition crushers for 11-50 tonne excavators, along with the VR Series of steel cutters with both fixed and rotating heads, which can be both boom or dipper stick mounted.
  • Bonfiglioli opts for AC/DC electric drum drive for truck mixers
    January 6, 2017
    Bonfiglioli has developed an electric drum drive for the new hybrid truck mixer from CIFA, the concrete equipment specialist owned by Chinese manufacturer Zoomlion. The 500 series drum drive with electric motor offers drum rotation speeds from 15-22rpm and is suited to mixer capacities from 6-14m3. The drivetrain relies on an AC induction motor to turn the drum, which gets its power from an on-board battery pack. The electric drum drive can also be powered by mains electricity – the latter can be plugged in
  • Bonfiglioli opts for AC/DC electric drum drive for truck mixers
    April 18, 2013
    Bonfiglioli has developed an electric drum drive for the new hybrid truck mixer from CIFA, the concrete equipment specialist owned by Chinese manufacturer Zoomlion. The 500 series drum drive with electric motor offers drum rotation speeds from 15-22rpm and is suited to mixer capacities from 6-14m3. The drivetrain relies on an AC induction motor to turn the drum, which gets its power from an on-board battery pack. The electric drum drive can also be powered by mains electricity – the latter can be plugged in
  • Atlas develops two new truck loading cranes
    January 6, 2017
    German firm Atlas has developed two new high performance truck loading cranes, the 186.3VB and the 129.3V. The cranes have a lower deadweight than previous models in this class and the 186.3VB model benefits from a centrally placed crane column that provides a large range of movement as well as high stability to both sides. The 186.3VB crane has extension cylinders fixed at the tip of the jib, a standard recycling valve and heavy duty supports. The short set-up time achieved due to the fast extension speed