Skip to main content

Demolition starts on Seattle’s Alaska Way Viaduct

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle is underway, including the filling in of a redundant road tunnel.
June 14, 2019 Read time: 2 mins
Coming down: Demolition of Seattle’s Alaska Way Viaduct, a 1950’s structure, began this winter (pic courtesy Philip Renaud)

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle in Washington State is underway, including the filling in of a redundant road tunnel.

Demolition contractor Kiewit Infrastructure West picked up the contract estimated at around US$94 million, according to media reports. Work is expected to take up to two years and includes filling in the Alaska Way’s Battery Street Tunnel.

For each segment of the viaduct, the contractor is removing the road decks, then girders and crossbeams and finally the support columns. During demolition, barriers are installed to protect nearby buildings and water is sprayed on the work to keep down dust.

Tunnel work includes decommissioning and removing the utility and mechanical systems, removal of hazardous material from the tunnel and, when finished, the sealing of the two entrances.

Kiewit decided against using conveyor belts to move the material into the Battery Street Tunnel. Instead, rubble is trucked to a nearby sorting area where rebar is removed. The material is crushed into small piece and loaded onto side-dumping trucks that carry the debris to openings along the tunnel route that lead directly down into the tunnel itself. The trucks dump the material into a steel funnel over the openings and down it goes into the tunnel. It takes less than a minute for the material to crash down into the tunnel where it is then levelled out by workers. Vibratory rollers spread and compact the material in layers.

Prior to the demolition work, there were public petitions to keep the Battery Street Tunnel open for pedestrian and bicycle use. However, the Washington State Department of Transportation decided that the structure, in need of repair,  would have been extremely expensive to upgrade to modern seismic standards – an important feature for any structure along the west coast of the US and up into Canada. The region lies along the infamous San Andreas Fault making it prone to earthquakes.

The new Alaska Way’s tunnel lies directly under the old viaduct and was the subject of a World Highways Key Project Report in 2017.

<%$Linker:

2

External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false false%>

 

Related Content

  • Kobelco is offering competitive excavators at Conexpo
    January 6, 2017
    KOBELCO Construction Machinery USA is raising its profile in the US with the introduction of the improved excavator range at Conexpo. One of the key new models in the line-up is the 5.5tonne class SK55, although the range extends all the way to the powerful SK500 which competes in the competitive 50tonne excavator class.
  • Kobelco is offering competitive excavators at Conexpo
    January 24, 2014
    KOBELCO Construction Machinery USA is raising its profile in the US with the introduction of the improved excavator range at Conexpo. One of the key new models in the line-up is the 5.5tonne class SK55, although the range extends all the way to the powerful SK500 which competes in the competitive 50tonne excavator class.
  • Montabert revives popular 501 breaker name
    January 6, 2017
    Montabert has updated its most well-known hydraulic breaker. When the French company started making hammers 40 years ago, its first breaker was called the BRH501. Now Montabert is launching a new series of breakers and the first model is called the 501 Next Generation. Weighing in at 730kg, the breaker has the same power as Montabert’s previous 1,000kg models. This increase in power to weight will allow demolition contractors to use the breaker on longer reach machines, or on smaller excavators if required.
  • Montabert revives popular 501 breaker name
    April 22, 2013
    Montabert has updated its most well-known hydraulic breaker. When the French company started making hammers 40 years ago, its first breaker was called the BRH501. Now Montabert is launching a new series of breakers and the first model is called the 501 Next Generation. Weighing in at 730kg, the breaker has the same power as Montabert’s previous 1,000kg models. This increase in power to weight will allow demolition contractors to use the breaker on longer reach machines, or on smaller excavators if required.