Skip to main content

Demolition starts on Seattle’s Alaska Way Viaduct

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle is underway, including the filling in of a redundant road tunnel.
June 14, 2019 Read time: 2 mins
Coming down: Demolition of Seattle’s Alaska Way Viaduct, a 1950’s structure, began this winter (pic courtesy Philip Renaud)

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle in Washington State is underway, including the filling in of a redundant road tunnel.

Demolition contractor Kiewit Infrastructure West picked up the contract estimated at around US$94 million, according to media reports. Work is expected to take up to two years and includes filling in the Alaska Way’s Battery Street Tunnel.

For each segment of the viaduct, the contractor is removing the road decks, then girders and crossbeams and finally the support columns. During demolition, barriers are installed to protect nearby buildings and water is sprayed on the work to keep down dust.

Tunnel work includes decommissioning and removing the utility and mechanical systems, removal of hazardous material from the tunnel and, when finished, the sealing of the two entrances.

Kiewit decided against using conveyor belts to move the material into the Battery Street Tunnel. Instead, rubble is trucked to a nearby sorting area where rebar is removed. The material is crushed into small piece and loaded onto side-dumping trucks that carry the debris to openings along the tunnel route that lead directly down into the tunnel itself. The trucks dump the material into a steel funnel over the openings and down it goes into the tunnel. It takes less than a minute for the material to crash down into the tunnel where it is then levelled out by workers. Vibratory rollers spread and compact the material in layers.

Prior to the demolition work, there were public petitions to keep the Battery Street Tunnel open for pedestrian and bicycle use. However, the Washington State Department of Transportation decided that the structure, in need of repair,  would have been extremely expensive to upgrade to modern seismic standards – an important feature for any structure along the west coast of the US and up into Canada. The region lies along the infamous San Andreas Fault making it prone to earthquakes.

The new Alaska Way’s tunnel lies directly under the old viaduct and was the subject of a World Highways Key Project Report in 2017.

<%$Linker:

2

External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false false%>

 

Related Content

  • Two new rough terrain cranes and a new MLC165 lattice-boom crawler crane from Manitowoc
    February 15, 2013
    Manitowoc will unwrap two new Grove rough-terrain cranes at Bauma: the RT550E and RT770E, as well as a new lattice-boom crawler crane. The 45tonne capacity RT550E offers the highest and longest boom in its class at 39m and, with a chassis length of just under 12m, a width of 2.55m and an operating weight of 29tonnes, the new machine is a compact crane that can run well within most national European road regulations for heavy machinery says Manitowoc. The RT550E also features the manufacturer’s new crane con
  • J-Tech’s LaneBlade clears the way
    February 28, 2022
    The hydraulically operated LaneBlade is mounted on the front of service vehicles meaning rescue personnel are safe from dangerously venturing onto live lanes or having to ‘look-and-leap’ for gaps in traffic.
  • INTERMAT 2012 sees JCB add 8026 CTS to mini excavator line
    January 6, 2017
    JCB is expanding its range of mini excavators with the launch of the 8026 CTS. The 8026 CTS joins the range alongside the zero tailswing 8025 ZTS in the line-up. The new 2.7tonne machine offers a conventional layout with a trailer-towable transport weight and increased lifting capacity. The 8026 CTS uses a dedicated boom and dipper arm for greater digging and lifting performance. Increased efficiency allows the 8026 CTS to use the same engine family as the 8025 ZTS, with a similar torque output, but with a
  • INTERMAT 2012 sees JCB add 8026 CTS to mini excavator line
    March 16, 2012
    JCB is expanding its range of mini excavators with the launch of the 8026 CTS. The 8026 CTS joins the range alongside the zero tailswing 8025 ZTS in the line-up. The new 2.7tonne machine offers a conventional layout with a trailer-towable transport weight and increased lifting capacity. The 8026 CTS uses a dedicated boom and dipper arm for greater digging and lifting performance. Increased efficiency allows the 8026 CTS to use the same engine family as the 8025 ZTS, with a similar torque output, but with a