Skip to main content

Demolition starts on Seattle’s Alaska Way Viaduct

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle is underway, including the filling in of a redundant road tunnel.
June 14, 2019 Read time: 2 mins
Coming down: Demolition of Seattle’s Alaska Way Viaduct, a 1950’s structure, began this winter (pic courtesy Philip Renaud)

Demolition of the Alaska Way Viaduct in the northwest US city of Seattle in Washington State is underway, including the filling in of a redundant road tunnel.

Demolition contractor Kiewit Infrastructure West picked up the contract estimated at around US$94 million, according to media reports. Work is expected to take up to two years and includes filling in the Alaska Way’s Battery Street Tunnel.

For each segment of the viaduct, the contractor is removing the road decks, then girders and crossbeams and finally the support columns. During demolition, barriers are installed to protect nearby buildings and water is sprayed on the work to keep down dust.

Tunnel work includes decommissioning and removing the utility and mechanical systems, removal of hazardous material from the tunnel and, when finished, the sealing of the two entrances.

Kiewit decided against using conveyor belts to move the material into the Battery Street Tunnel. Instead, rubble is trucked to a nearby sorting area where rebar is removed. The material is crushed into small piece and loaded onto side-dumping trucks that carry the debris to openings along the tunnel route that lead directly down into the tunnel itself. The trucks dump the material into a steel funnel over the openings and down it goes into the tunnel. It takes less than a minute for the material to crash down into the tunnel where it is then levelled out by workers. Vibratory rollers spread and compact the material in layers.

Prior to the demolition work, there were public petitions to keep the Battery Street Tunnel open for pedestrian and bicycle use. However, the Washington State Department of Transportation decided that the structure, in need of repair,  would have been extremely expensive to upgrade to modern seismic standards – an important feature for any structure along the west coast of the US and up into Canada. The region lies along the infamous San Andreas Fault making it prone to earthquakes.

The new Alaska Way’s tunnel lies directly under the old viaduct and was the subject of a World Highways Key Project Report in 2017.

<%$Linker:

2

External <?xml version="1.0" encoding="utf-16"?><dictionary /> 0 0 0 link-external https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false https://www.worldhighways.com/categories/road-highway-structures/features/bertha-ends-her-alaskan-way-voyage-in-seattle/ false false%>

 

Related Content

  • Ramtec adds new high-impact range of BH backhoe hydraulic hammers
    February 15, 2013
    Attachments specialist Ramtec is adding three new hydraulic hammers to its range at Bauma. The BH32, BH40 and BH52 backhoe hammers will be marketed under the Robi brand and the key features are high oil flows for high impact frequency, greater productivity levels and more penetration effort; constant blow energy to ensure constant strength; and low fuel consumption rates. All of the new backhoe hammers have sound suppression housing as standard, says Ramtec. The Finnish manufacturer will also unveil a new c
  • Dynapac is offering new pavers to meet future emissions requirements
    January 6, 2017
    Dynapac continues to innovate with its paver range, following from previous developments in 2010 and 2011. The firm says it is now improving the operator´s environment and transport sizes, as well as gearing up to meeting future exhaust emission regulations. The firm introduced six new tracked asphalt pavers with paving widths of 2-14m. Of these, the four sophisticated PLC-controlled pavers SD2500 C / SD2500 CS / SD2550 C / SD2550 CS are designed to meet the needs of contractors, communities and rental comp
  • Dynapac is offering new pavers to meet future emissions requirements
    April 12, 2012
    Dynapac continues to innovate with its paver range, following from previous developments in 2010 and 2011. The firm says it is now improving the operator´s environment and transport sizes, as well as gearing up to meeting future exhaust emission regulations. The firm introduced six new tracked asphalt pavers with paving widths of 2-14m. Of these, the four sophisticated PLC-controlled pavers SD2500 C / SD2500 CS / SD2550 C / SD2550 CS are designed to meet the needs of contractors, communities and rental comp
  • Powerscreen to reveal new machine enhancements
    February 12, 2013
    Powerscreen is unveiling new product improvements in a line-up of three machines: the XA400S pre-screen jaw crusher; the XH320X impact crusher and the Warrior 1400X screen. “We are excited to be revealing the latest enhancements made to our product portfolio at bauma. This year’s exhibition will be the first showing of the new Warrior 1400X screen anywhere in the world and will provide visitors with an opportunity to look closer at the recently released XA400S pre-screen and XH320X crushers,” says Damian Po