Skip to main content

Crane collapse on US bridge project

A crane collapsed over the Tappan Zee Bridge in the US on July 19th. Construction work is being carried out on the bridge. The structure is located in Tarrytown, New York State and the bridge is around 40km north of central Manhattan, spanning the Hudson River at one of its widest points. The crane was being used for the construction work and collapsed right across the roadway and in front of vehicles using the crossing. A number of vehicles were damaged in the incident and local news reports suggest up to
July 20, 2016 Read time: 2 mins
A crane collapsed over the Tappan Zee Bridge in the US on July 19th. Construction work is being carried out on the bridge. The structure is located in Tarrytown, New York State and the bridge is around 40km north of central Manhattan, spanning the Hudson River at one of its widest points. The crane was being used for the construction work and collapsed right across the roadway and in front of vehicles using the crossing. A number of vehicles were damaged in the incident and local news reports suggest up to five people were injured, including vehicle occupants and one construction worker. The injuries are not thought to be serious however. Some vehicles were hit by falling debris while a number of others were involved in a shunt as they braked to avoid the wreckage.

The crane was driving piles for the new bridge, which has been under construction for three years. It is not clear at this stage what caused the crane to collapse however while the machine has been reported by local news outlets as being comparatively new.

The incident caused major traffic delays for drivers until the wreckage of the crane could be cleared to one side. Some drivers were forced to spend several hours sitting in their stalled vehicles on the bridge until they could be rediverted.

The new bridge should be complete in 2018 and its construction is costing in the area of US$3.9 billion. It will replace the existing structure which was built in 1955 and carries up to 138,000 vehicles/day, including a high percentage of heavy trucks, but is no longer able to cope with traffic demand.

Related Content

  • Over 1/3rd of US bridges needing repair or replacement
    April 15, 2020
    Over 1/3rd of US bridges are needing repair or replacement according to a new report.
  • Hinergia bridge project finds federal funding
    March 27, 2017
    A budget worth nearly US$252 million will help pay for bridge design and construction work as well as bridge repair activities in 12 states across Nigeria. The budget has been approved by Nigeria’s Federal Executive Council (FEC). Meanwhile $475 million is being budgeted for the engineering and consultancy work required for the Second Niger Bridge that will connect the city of Asaba in Delta State with Onitsha in Anambra State. The new bridge is desperately required as the existing structure is in poor cond
  • UK road safety gain during pandemic
    October 14, 2021
    The UK has seen a road safety gain during the pandemic.
  • Almost gone: Canada’s old Port Mann Bridge deconstructed
    August 14, 2015
    Three years ago a welder’s cut halved Canada’s old Port Mann Bridge. David Arminas reports from the banks of the Fraser River. By the time this issue of World Highways reaches you, one of Canada’s iconic steel arch bridges will be a shadow of its former self. It’s been a three-year demolition job since the first cut across the deck of the old Port Mann Bridge just outside the city of Vancouver on Canada’s Pacific coast. A new 10-lane 2.2km Port Mann Bridge opened in 2012 (see box). It runs parallel to the o