Skip to main content

Crane collapse on US bridge project

A crane collapsed over the Tappan Zee Bridge in the US on July 19th. Construction work is being carried out on the bridge. The structure is located in Tarrytown, New York State and the bridge is around 40km north of central Manhattan, spanning the Hudson River at one of its widest points. The crane was being used for the construction work and collapsed right across the roadway and in front of vehicles using the crossing. A number of vehicles were damaged in the incident and local news reports suggest up to
July 20, 2016 Read time: 2 mins
A crane collapsed over the Tappan Zee Bridge in the US on July 19th. Construction work is being carried out on the bridge. The structure is located in Tarrytown, New York State and the bridge is around 40km north of central Manhattan, spanning the Hudson River at one of its widest points. The crane was being used for the construction work and collapsed right across the roadway and in front of vehicles using the crossing. A number of vehicles were damaged in the incident and local news reports suggest up to five people were injured, including vehicle occupants and one construction worker. The injuries are not thought to be serious however. Some vehicles were hit by falling debris while a number of others were involved in a shunt as they braked to avoid the wreckage.

The crane was driving piles for the new bridge, which has been under construction for three years. It is not clear at this stage what caused the crane to collapse however while the machine has been reported by local news outlets as being comparatively new.

The incident caused major traffic delays for drivers until the wreckage of the crane could be cleared to one side. Some drivers were forced to spend several hours sitting in their stalled vehicles on the bridge until they could be rediverted.

The new bridge should be complete in 2018 and its construction is costing in the area of US$3.9 billion. It will replace the existing structure which was built in 1955 and carries up to 138,000 vehicles/day, including a high percentage of heavy trucks, but is no longer able to cope with traffic demand.

Related Content

  • I Lift NY crane places first girder on New York’s Tappan Zee Bridge
    June 25, 2015
    One of the world’s largest cranes has placed the first steel girder assembly for the approach span of the new NY Bridge, often called the Tappen Zee Bridge in New York. The barge-mounted I Lift NY super crane with its nearly 100m boom slowly picked up the 125m unit from its delivery barge and gently lowered it onto concrete pedestals in the Hudson River, near the Rockland County side of the bridge. The super crane will install even larger sections of the new bridge, some of which weigh around 907tonne
  • Bridge collapse disaster in Baltimore
    March 26, 2024
    A ship collision has caused a highway bridge collapse in Baltimore.
  • Bridge collapse on key I-5 route in Washington State
    June 24, 2013
    The news that a key highway bridge has collapsed in the US comes as gloomy reading for all in the highway sector. When a section of the Interstate 5 Bridge over the Skagit River in Washington failed in May 2013, a number of vehicles were plunged into the river. Luckily no-one was killed in the incident on the route, which is one of the main links between the US and Canada, and the parallel bridge was able to carry traffic, albeit with delays for users.
  • New NY Bridge - Tappan Zee - main span towers poured
    December 16, 2016
    One of the largest US infrastructure projects is nearer completion after recent topping out of the eight main span towers of the New NY Bridge. The final concrete pour was in mid-December and all piles - more than 1,000 - have been installed in Hudson River. To date, 3,000 roadway panels for the approaches - making 5.5km in length - have been installed, according to the New York State Thruway Authority, owner of the New NY Bridge project. The New NY Bridge, also called the Tappan Zee Bridge, is on tra