Working in tandem

A tandem crane lift has been carried out in Kuwait on a major project in using Demag machines from Terex. The two machines have been used on the Kuwaiti government's Sheikh Jaber Al Ahmad Al Sabah Causeway Project. This 36km-long road connection is among the world's largest infrastructure projects underway at present. The project includes a 27km-long bridge over Kuwait Bay. The Kuwaiti logistics service provider Integrated Logistics Company (ILC) is carrying out key sections of the project, moving pre-a
August 16, 2018 Read time: 3 mins
Demag cranes from Terex have been used in a double lift to raise components for the new Kuwait causeway project
A tandem crane lift has been carried out in Kuwait on a major project in using Demag machines from 1222 Terex.


The two machines have been used on the Kuwaiti government's Sheikh Jaber Al Ahmad Al Sabah Causeway Project. This 36km-long road connection is among the world's largest infrastructure projects underway at present. The project includes a 27km-long bridge over Kuwait Bay.

The Kuwaiti logistics service provider Integrated Logistics Company (ILC) is carrying out key sections of the project, moving pre-assembled concrete supports to a construction site near Sabiya. The firm was commissioned for this task by the Kuwaiti construction ministry. For this task, ILC used its new Demag AC 300-6 cranes, the first units of this type delivered by the German plant in Zweibrücken to an international customer.

According to ILC, the versatility of the machines was a key factor in its purchase of the units. The two Demag AC 300-6 cranes had to lift precast concrete components from a hydraulic dolly type trailer with a turn table system and place them in each pre-planned position. Because the steel-reinforced concrete elements weighed 105tonnes each, were approximately 37m long, 1m wide, and 2.3m high, the work was best done with a tandem lift.

However, before the lifting could be done, the two Demag AC 300-6 cranes had to be brought to the construction site. This involved a 130km-long drive from the ILC yard in Mina Abdullah through the desert. The cranes were accompanied by four tractor-trailer rigs, which transported the required counterweight of approximately 50tonnes, as well as other equipment necessary for the work. The crane operators needed two hours with the help of two riggers apiece to set up the cranes.

For the subsequent tandem lift, the cranes were outfitted with 24.4m-long main booms, a counterweight of 26.7tonnes, and an 80tonne hook block with seven-part reeving. An outrigger support base of 8.68 x 8.48m provided the required stability. Rigged this way, the cranes were prepared to lift the two 105tonne concrete beams from the lowbed trailer in two steps in a tandem lift, swivel them sideways in a radius of 9m, and lower them at the specified place in the desert sand. The ILC team was able to complete the job in just one day.

The Heavy-Duty Lifting and Assembly division of ILC operates across the entire Middle East. Its focal points are in Kuwait, Saudi Arabia, Qatar, and in the United Arab Emirates. For large projects, ILC has a fleet that includes cranes with lifting capacities up to 2,300tonnes, excavators, compactors, and bulldozers.

ILC also recently added two new Demag CC 3800-1 lattice boom crawler cranes as well as two new LR 1300 crawler cranes from 718 Liebherr to further expand its fleet.

Road Structures

For more information on companies in this article

Related Content

  • Crane versatility helps with bridge building
    August 14, 2014
    The versatility and mobility of a Terex crawler crane has helped enormously with the construction of a new road bridge in Luxemburg. The Terex Superlift 3800 lattice boom crawler crane owned by Trier-based Steil Kranarbeiten was used to build a bridge in Luxemburg only two days after the same machine was used on a job in the Hunsrück mountain range. The machine was needed to lift a 440m long bridge across a valley, connecting a new section of highway.
    Read More
  • Heavy lifting
    January 7, 2019
    UAE-based crane service provider Al Faris dispatched a team to Hamriyah, to lift three 72m-long, 130tonne spud legs from a barge. The job needed a powerful and precise crane and a Demag CC 3800-1 proved to be a highly suitable machine for the project. The unit first had to be transported to the worksite. The company’s own lowbed trailers needed a good ten hours to complete the 82km journey from the Al Faris location in Dubai Industrial City to the worksite. Al Faris’ own all-terrain cranes were used in ord
    Read More
  • Super job for a Demag CC 3800-1 without a Superlift counterweight
    July 4, 2019
    A Demag CC 3800-1 crane with an 84m-long main boom was recently set up in Germany without a Superlift counterweight to save space. The jobsite was the replacement of the old viaduct on the A45 Freeway that spans the Lahn River near Dorlar in Germany. Bietigheim-Bissingen-based crane service provider Wiesbauer solved the site’s space issues by using a Demag CC 3800-1. “This site required us to lift loads of 96-148tonnes at radii of 40-64m, so there was no option but to use a crawler crane in the 650tonne c
    Read More
  • Giving credence for Clearwater revival
    October 29, 2018
    The Minnesota Highway 24 Bridge spanning the Mississippi River at Clearwater is not a major structure. However, it does play a key role as the 376.4m-long bridge links US Highway 10 and Interstate 94. These routes run parallel on opposite sides of the Mississippi River and connect St Cloud to Minneapolis. There was a need to replace the old bridge, built in the 1950s, as it has been designated functionally obsolete, while it featured a restricted maximum load of 36.3tonnes. The price tag to demolish and
    Read More

Highlighted Content