RMD’s Hong Kong highway project

RMD Kwikform has supplied its 80kN Rapidshor shoring for the widening of the Tolo Highway, running between the Island House Interchange and Tai Hang in Hong Kong. The project, overseen by main contractor Gammon Construction and set to be completed by the end of 2013, will widen the Tolo Highway from a two to four-lane carriageway in each direction, alleviating traffic congestion. “We were approached by [project] sub-contractors, United Soundfair and Richwell Engineering to supply shoring and formwork suppor
June 13, 2012 Read time: 2 mins
319 RMD Kwikform has supplied its 80kN Rapidshor shoring for the widening of the Tolo Highway, running between the Island House Interchange and Tai Hang in Hong Kong.

The project, overseen by main contractor 1526 Gammon Construction and set to be completed by the end of 2013, will widen the Tolo Highway from a two to four-lane carriageway in each direction, alleviating traffic congestion.

“We were approached by [project] sub-contractors, United Soundfair and Richwell Engineering to supply shoring and formwork support,” says Noel Kennedy, general manager for RMD Kwikform Hong Kong.

“The scale of the site and project required the use of our 80kN capacity Rapidshor shoring, to ensure safety and the continuous traffic flow needed, whilst the widening took place. Due to the location of the site, we also needed to engineer a solution using Rapidshor to support the overhead works spanning the slip roads at interchanges, whilst maintaining a safe access route for traffic.

“In addition to the main Rapidshor shoring, we also utilised our Megashor heavy duty shoring to provide extra support to a variety of the bridge deck structures, some up to a height of 25metres,  with SuperSlim and GTX Beams used to create the soffit.”

Kennedy says the Tolo Highways project is one of many that have benefitted from the use of Rapidshor, which is one of the more widely used systems in Hong Kong. RMD Kwikform says it’s popular with sub-contractors, as it allows them to use less labour, due to the heavy leg load capacity.

Road Structures

For more information on companies in this article

Related Content

  • Ramboll’s Simon Benfield looks at the future of gantry design
    September 29, 2016
    Gantries first appeared over highways in the late 1960s and are now of increased importance, thanks to the emergence of Smart Motorways, writes Simon Benfield* The motorway network exhibits a timeline of innovation; lane control signals on highways appeared in the 1970s
    Read More
  • Italy's new southern highway route
    May 13, 2021
    An important new highway route is currently under construction in South Italy
    Read More
  • Importance of road/tunnel drainage systems
    April 10, 2012
    A variety of systems are available for quickly and efficiently removing water from roads as Patrick Smith reports The presence of water in a highway layer reduces the bearing capacity of the road, and in doing so it also reduces the structure's lifetime. Indeed, the recent extremely cold winter in many parts of Europe has shown that in colder climates there is a risk of frost damage when water is present resulting in costly potholes, so drainage systems performing properly are important in road design.
    Read More
  • Importance of road/tunnel drainage systems
    May 8, 2012
    A variety of systems are available for quickly and efficiently removing water from roads as Patrick Smith reports. The presence of water in a highway layer reduces the bearing capacity of the road, and in doing so it also reduces the structure's lifetime. Indeed, the recent extremely cold winter in many parts of Europe has shown that in colder climates there is a risk of frost damage when water is present resulting in costly potholes, so drainage systems performing properly are important in road design.
    Read More

Highlighted Content