Skip to main content

Overlay extends bridge's life

More than 3,000 vehicles a day pass over the US-95 Bridge over Lake Creek near the Coeur D'Alene Tribal Casino in Worley, Idaho, USA. The original deck, built in 2007, was poured concrete with a micro-silica layer added for protection. A QTT weather station with FreezeFree anti-icing technology is mounted in the bridge rail. With big variances in temperature and a lot of wind in this region, the original deck material became thick causing a near 80m length of micro-silica to over-harden. Idaho DOT engineers
July 24, 2012 Read time: 2 mins
More than 3,000 vehicles a day pass over the US-95 Bridge over Lake Creek near the Coeur D'Alene Tribal Casino in Worley, Idaho, USA.

The original deck, built in 2007, was poured concrete with a micro-silica layer added for protection. A QTT weather station with FreezeFree anti-icing technology is mounted in the bridge rail.

With big variances in temperature and a lot of wind in this region, the original deck material became thick causing a near 80m length of micro-silica to over-harden.

Idaho DOT engineers observed "dough balls" in the original placement, and these started to break off leaving voids in the bridge deck surface where water and ice have potential to collect.

Indeed, cracks occurred and Idaho Department of Transportation (IDOT) sought a solution to make the bridge deck watertight. Left untreated, the shrinkage cracks in the surface would more than likely have led to premature deck failure.

IDOT specified that contractor Max J. Kuney install a T48 Thin Polysulfide Epoxy Slurry Overlay manufactured by 350 Transpo Industries on the sections of the bridge deck due to the problems.

The polysulfide epoxy resin-based system resists the effects of ultra-violet degradation, while the slurry application method allows for installation with minimum traffic disruption.

Transpo says that the 9.5mm thick waterproof overlay adds minimal dead load to the structure, while the broadcast aggregate surface will maintain high skid resistance for many years.

Engineer for the project was HDR, and the surface was prepared with shot-blasting one lane at a time over for four lanes.

Transpo Industries also supplied the T-48 product Thin for the rehabilitation of the Interstate 70 overpass in Grainfield, Kansas, the first thin slurry type overlay used by the Kansas DOT.

It took the crew from contractor Wildcat Concrete Services just over 2 hours to complete each half of a 576m² bridge deck.

For more information on companies in this article

Related Content

  • Versatile pavement re-texturing machine
    February 6, 2012
    AN INNOVATIVE wet steel shotblasting machine developed by pavement re-texturing specialist Klaruw is now being tested in the UK.
  • Pavement preservation techniques
    February 16, 2012
    In this second article of a three-part series on pavement preservation, Alan S. Kercher, of Kercher Engineering, discusses the different techniques that can be utilised as part of the preservation toolbox
  • Pavement preservation techniques
    April 12, 2012
    In this second article of a three-part series on pavement preservation, Alan S. Kercher, of Kercher Engineering, discusses the different techniques that can be utilised as part of the preservation toolbox An agency should utilise a comprehensive preservation toolbox that includes various techniques, which can be applied to specific needs. There is no one technique that will cost-effectively address all pavement problems. However, there are many preservation techniques that can provide an agency with the ab
  • Bitumen technology: cutting maintenance costs
    April 8, 2022
    Thicklift in Utah, epoxy modification for Ethiopia and inbuilt de-icing in South Korea - a focus on technologies designed to lower maintenance and rehabilitation costs over the life of a pavement