New tunnel connection for Mexico

A major tunnel construction project has been carried out in Mexico, setting a technological precedent for Latin America . Mexican materials giant CEMEX took part in the construction of the Coatzacoalcos Underwater Tunnel in Veracruz, Mexico. This innovative project features large tunnel bores and utilised a complex construction process. As a result of these technical challenges CEMEX was required to design and deliver special concretes so as to allow the construction of the different structures needed to
November 8, 2017 Read time: 3 mins
The new tunnel sets a precedent for Latin America

A major tunnel construction project has been carried out in Mexico, setting a technological precedent for Latin America

Mexican materials giant 3016 CEMEX took part in the construction of the Coatzacoalcos Underwater Tunnel in Veracruz, Mexico. This innovative project features large tunnel bores and utilised a complex construction process. As a result of these technical challenges CEMEX was required to design and deliver special concretes so as to allow the construction of the different structures needed to provide the tunnel and profile as well as for the portals.

Because the route of the tunnel runs under water the company managing the project, Constructora Túnel de Coatzacoalcos, asked CEMEX to deliver specific concrete solutions for the different structural elements and the agents to which they would be exposed. “Through its quality department, CEMEX worked with us to design the concrete mix used in the tunnel to meet the durability requirements specified by the needs of this project and international standards,” explained Darwin Hernandez, technical manager for the construction project.

CEMEX supplied 48,000m3 of special products, from concrete for the different structural elements to the design and placement of concrete pavement inside the tunnel and the toll area. CEMEX supplied concrete in separate massive pouring of 600m3 and 800m3 for the slabs of the access ramps to the tunnel.

“CEMEX offered its know-how and ability to solve construction challenges. Additionally, it followed up very closely with both the needs prior to the design of the project and the concrete formulations to proceed with the castings,” added Jose Armengol Notario, production superintendent of Producción de Constructora Túnel de Coatzacoalcos.

The chosen construction method was developed in the Netherlands and was selected as it provided the least impact on urban areas. The technique utilised large prefabricated reinforced concrete modules that were produced in a dry dock and then transported to the site for installation under water. For this project, five concrete blocks were built in a dry dock on the banks of the Coatzacoalcos River and later transferred and placed at the bottom of the river.

The tunnel features four traffic lanes in all, with two in each direction, and is expected to ease traffic congestion between the Coatzacoalcos urban area and the petrochemical industrial area of Villa Allende. Its effect on congestion is expected to be significant, reducing commuting times from 30 minutes to just three minutes.

Road Structures

For more information on companies in this article

Related Content

  • Swell times for swale construction with a Sidewinder
    October 9, 2018
    Specialised swale construction featured in Northern England recently UK contractor Balfour Beatty examined different methods for building swales along the Norwich Northern Distributor Road near the English city of Norwich. Balfour decided to trial specialised road-widening machines, specially configured excavator buckets and modified compaction equipment. Excavators and dump trucks prepared the area for placement of sub-base material. The swale areas were constructed using both conventional methods as wel
    Read More
  • Mexico’s new Jala-Puerto Vallarta Highway
    August 29, 2017
    Mexico’s highway infrastructure plays a key role in the country’s economy, carrying around 55% of its freight and 98% of its passenger traffic. To meet this demand, the network has 377,660km of roads in all. This is split between the 49,652km federal highway network, the 83,982km of state roads, 169.429km of rural roads and 74,596km of access roads. mHowever, although the federal road network manages to connect a large part of the country's strategic points, some stretches already present problems with satu
    Read More
  • Vinci picks up Lafonataine Tunnel work
    August 12, 2020
    The renovated tunnel is expected to have about 40 years of life.
    Read More
  • Terex cranes in a tight spot in Michigan
    February 6, 2017
    Terex cranes have been involved in a multiple bridge repair project in the US More than 96,000 vehicles per day travel a stretch of I-96, including its 52-year-old bridges. The Michigan Department of Transportation is in the midst of a two-year US$77 million project to repair bridges and relieve increasing congestion along Interstate 96 at the U.S. Highway 23 interchange in Livingston County. Toebe Construction along with joint venture partner Kamminga & Roodvoets are bringing in a lot of lifting powe
    Read More

Highlighted Content