Skip to main content

The need to repair and replace the world's bridges

The future of Scotland's Forth Road Bridge is posing serious questions with a wide potential impact for the transportation sector. All over the world existing highway bridges are in need of repair and replacement, with potentially catastrophic consequences should this need be ignored.
February 22, 2012 Read time: 3 mins
The future of Scotland's Forth Road Bridge is posing serious questions with a wide potential impact for the transportation sector. All over the world existing highway bridges are in need of repair and replacement, with potentially catastrophic consequences should this need be ignored.

The Forth Road Bridge opened to traffic in 1964, having been conceived and designed in the 1950s. It is a well thought out and well engineered structure that was built to good quality standards, while it has also been regularly maintained. Despite all this however, the bridge is wearing out. A combination of factors has resulted in the structure facing an uncertain future.

One of the problems is that the bridge carries significantly more traffic than it was designed for. A huge boom in car ownership in Europe has resulted in a massive increase in cars using the bridge.

Another problem is that when the bridge was designed, heavy goods vehicles (HGVs) had gross vehicle weights (GVW) of around 20tonnes, while these only represented a comparatively small proportion of the traffic on the UK's roads. European regulations now allow for HGVs weighing up to 44tonnes, with the prospect of even heavier vehicles to come. There has been a reduction in freight being carried by train and a corresponding increase in truck traffic over the last 40 years on the UK's roads. The combination of the increased vehicle traffic and greater numbers of heavier trucks mean that the bridge is now carrying loads far beyond the vision of its designers.

Furthermore the bridge has suffered from the corrosive effects of salt, which has reduced the strength of its suspension cables. Measures have been taken to assess the wear and dry out the cables but questions remain over the long term life of the entire bridge.

Bear in mind that the Forth Road Bridge was well designed, well built and has been well maintained. And even so, it is wearing out. The highway bridge collapse in Minnesota which resulted in numerous fatalities shows that even in affluent developed nations, such disasters can occur.

A new Forth Replacement Bridge is being planned at a cost of some E2.64 billion and once this opens, it will carry heavy vehicles and these will not be allowed over the current bridge.

Complacency has resulted in developed countries often ignoring the critical need for infrastructure maintenance. Studies show that thousands of bridges are in desperate need of repair or replacement in the US alone. And the Chinese authorities have also identified a need to replace a large number of bridges that are now unable to cope with rapidly expanding traffic volumes. Bridge replacement programmes have to be considered now before it is too late and before another disaster claims the lives of road users as happened in Minnesota.

Related Content

  • Securing safer transportation infrastructure through non-destructive technology
    June 16, 2014
    Kevin Vine reports on the use of non-destructive testing for structural analysis of bridges Seven years ago, the overpass collapse in Laval, Québec that led to the death of five people brought to light severe issues with the state of the country’s bridges and transportation infrastructure. More recently, a crack in the Champlain Bridge to Montreal that forced over 160,000 commuters to find alternate routes to work reaffirmed a need for greater emphasis on early detection before a crisis occurs.
  • Road recycling saves time and costs, reduces emissions
    February 13, 2012
    Stabilisers bring recycling improvements to roads in the UK and Armenia. The local road authorities near the UK city of Bath have saved nearly €250,500 on the cost of repairing a 400m long section of the B3110 Midford Road. This saving has been achieved by opting to recycle and strengthen in-situ the existing surface, instead of using conventional full depth pavement reconstruction.
  • Smart constructioon with GIS, GPS design technology
    February 16, 2012
    A UK highway project has benefited from the latest software, GIS and GPS technology, Mike Woof reports. Sophisticated software, GIS and GPS technology has played an important role in a large highway upgrade project in the UK and helping to increase efficiency and drive down construction costs.
  • Germany builds its first major PPI autobahn project
    July 7, 2015
    Rebuilding of one of the oldest motorways in Germany is testing out the possibilities for public-private project road construction reports Adrian Greeman A freshly renovated section of the A8 Autobahn in southern Germany will be watched with some interest this summer as traffic begins driving along its rebuilt carriageway and additional third lanes. That is not because of any special road features, other than a distinctive reddish colour to its concrete surface, but because it is a first fullscale public