Aggregate Industries lightens the load for the Acton Swing Bridge

Aggregates Industries recently lightened the load for the 73m-long bow string truss Acton Swing Bridge in England. When opened in 1933, it was the first floating swing bridge in the UK – floating on a pontoon. The 84-year-old bridge, which is cared for by the Canal & River Trust charity, carries the busy A49 road over the River Weaver Navigation, in the county of Cheshire. A recent €1.7 million complete refurbishment included strengthening works to the underside of the bridge as well as improvements to its
October 2, 2018 Read time: 3 mins
Work in full swing on the Acton Swing Bridge
Aggregates Industries recently lightened the load for the 73m-long bow string truss Acton Swing Bridge in England. When opened in 1933, it was the first floating swing bridge in the UK – floating on a pontoon.


The 84-year-old bridge, which is cared for by the Canal & River Trust charity, carries the busy A49 road over the River Weaver Navigation, in the county of Cheshire. A recent €1.7 million complete refurbishment included strengthening works to the underside of the bridge as well as improvements to its appearance.

Core to the project’s success was the ability to enhance the bridge’s structural integrity to allow for heavier traffic. The challenge was to do this without an increase of mass – given the required 2.5m allowance for boats passing underneath.

As such, 2297 Aggregate Industries’ Lytag secondary aggregate - up to 50% lighter than normal weight aggregate - was chosen by lead contractor Kier Construction. By using Lytag to replace the infill with the framework, the weight was effectively reduced from 2,400kg/m³ to 1,650kg/m³. This gave increased flexibility and durability for Kier, while ensuring an increased overall strength. The approach also negated the need for quarried aggregate, helping to reduce material requirements and ensure efficiencies.

With works now complete, the contract saw Aggregate Industries supply 100tonnes of 0/14mm Lytag - a tailored blend of aggregates specifically designed to offer a greater reduction in concrete density.

The design freedom afforded by Lytag offers the same level of structural performance as normal weight concrete, explained Steve Curley, general manager for Lytag at Aggregate Industries.


“However, it is significantly lighter, thus reducing the dead load of a construction. In projects such as Acton Swing Bridge, where strengthening works need to be achieved without resulting in an increase to size or mass, this product can really make the otherwise infeasible achievable.”

The lightweight concrete has a density of 1,850kg/m³ using natural fines (normal weight concrete of 2,400 kg/m³). If fines are used in conjunction with the 4/14mm aggregate, the density can be as low as 1,650kg/m³.

Using Lytag within the design can not only reduce the thickness of the slab, columns and foundations but reduce the amount of rebar required, resulting in a quicker more cost-effective greener structure.

Aggregate Industries is a member of the Swiss global building materials provider LafargeHolcim Group.

Road Structures

For more information on companies in this article

Related Content

  • A cracking time for a Rockster Duplex R1200D/R1100DS crusher
    May 1, 2018
    Rockster’s DUPLEX system combining jaw and impact crusher has been hard at work at the Casaccia gravel quarry at the base of Switzerland’s Maloja Pass. The quarry – a part of the Hartmann Group - offers a range of gravel and sand types. Many construction companies from the Graubünden area rely on the certified products such as sand, gravel and grain mixtures. The increasing demand for recycling products such as concrete and mixed demolition granules is also supplied by the Casaccia quarry. It recycles
    Read More
  • New hydrodemolition system from Aquajet
    August 10, 2018
    Aquajet Systems says that its new Aqua Spine is a modular system that uses high-pressure water jets to remove concrete from surfaces that may be inaccessible for Aqua Cutter robots. The Aqua Spine allows hydrodemolition techniques to be used in areas that would otherwise be difficult to access, providing a safe and efficient technology for users. Hydrodemolition uses high-pressure water jets to precisely remove sound, deteriorated or damaged concrete. The sustainable method leaves rebar undamaged while pro
    Read More
  • Accurate weigh-in-motion technology
    June 21, 2016
    Weigh-in-motion technology is ensuring increasingly accurate, and flexible, weighing stations. Weigh-in-motion specialist manufacturer Axtec says that its space-saving dynamic weighbridge is accurate to within ±0.5% and is the most precise system in the world. From its Runcorn, UK manufacturing facility, Axtec undertakes research and development of new technologies, as well as software testing, fabrication, construction and installation of WIM products. Axtec’s axle weighing platform design is intended f
    Read More
  • Wirtgen Group machines delivering new runway for German airbase
    October 26, 2016
    Machines from the Wirtgen Group are carrying out an important reconstruction job for the surface course at Büchel Air Base. Road machinery from Hamm, Vögele and Wirtgen as well as asphalt plants from Benninghoven have been carrying out the work, delivering a new runway within a tight timeframe. To achieve this, the work had to be planned well in advance, with the contractors organising the logistics and their personnel accordingly.
    Read More

Highlighted Content