Aggregate Industries lightens the load for the Acton Swing Bridge

Aggregates Industries recently lightened the load for the 73m-long bow string truss Acton Swing Bridge in England. When opened in 1933, it was the first floating swing bridge in the UK – floating on a pontoon. The 84-year-old bridge, which is cared for by the Canal & River Trust charity, carries the busy A49 road over the River Weaver Navigation, in the county of Cheshire. A recent €1.7 million complete refurbishment included strengthening works to the underside of the bridge as well as improvements to its
October 2, 2018 Read time: 3 mins
Work in full swing on the Acton Swing Bridge
Aggregates Industries recently lightened the load for the 73m-long bow string truss Acton Swing Bridge in England. When opened in 1933, it was the first floating swing bridge in the UK – floating on a pontoon.


The 84-year-old bridge, which is cared for by the Canal & River Trust charity, carries the busy A49 road over the River Weaver Navigation, in the county of Cheshire. A recent €1.7 million complete refurbishment included strengthening works to the underside of the bridge as well as improvements to its appearance.

Core to the project’s success was the ability to enhance the bridge’s structural integrity to allow for heavier traffic. The challenge was to do this without an increase of mass – given the required 2.5m allowance for boats passing underneath.

As such, 2297 Aggregate Industries’ Lytag secondary aggregate - up to 50% lighter than normal weight aggregate - was chosen by lead contractor Kier Construction. By using Lytag to replace the infill with the framework, the weight was effectively reduced from 2,400kg/m³ to 1,650kg/m³. This gave increased flexibility and durability for Kier, while ensuring an increased overall strength. The approach also negated the need for quarried aggregate, helping to reduce material requirements and ensure efficiencies.

With works now complete, the contract saw Aggregate Industries supply 100tonnes of 0/14mm Lytag - a tailored blend of aggregates specifically designed to offer a greater reduction in concrete density.

The design freedom afforded by Lytag offers the same level of structural performance as normal weight concrete, explained Steve Curley, general manager for Lytag at Aggregate Industries.


“However, it is significantly lighter, thus reducing the dead load of a construction. In projects such as Acton Swing Bridge, where strengthening works need to be achieved without resulting in an increase to size or mass, this product can really make the otherwise infeasible achievable.”

The lightweight concrete has a density of 1,850kg/m³ using natural fines (normal weight concrete of 2,400 kg/m³). If fines are used in conjunction with the 4/14mm aggregate, the density can be as low as 1,650kg/m³.

Using Lytag within the design can not only reduce the thickness of the slab, columns and foundations but reduce the amount of rebar required, resulting in a quicker more cost-effective greener structure.

Aggregate Industries is a member of the Swiss global building materials provider LafargeHolcim Group.

Road Structures

For more information on companies in this article

Related Content

  • Germany builds its first major PPI autobahn project
    July 7, 2015
    Rebuilding of one of the oldest motorways in Germany is testing out the possibilities for public-private project road construction reports Adrian Greeman A freshly renovated section of the A8 Autobahn in southern Germany will be watched with some interest this summer as traffic begins driving along its rebuilt carriageway and additional third lanes. That is not because of any special road features, other than a distinctive reddish colour to its concrete surface, but because it is a first fullscale public
    Read More
  • Innovative high performance asphalt technology
    February 14, 2012
    An authority replaces container wharf pavement damaged by forklift loads in world's first commercial use of high-performance asphalt base course. By Paul Fournier
    Read More
  • Rigorous testing for high performance materials
    February 9, 2012
    Today’s highways require high performance materials, and this means rigorous testing as Patrick Smith reports Highways are under greater pressure than ever today and asphalts have to grant high performances in order to withstand traffic and meet the standards. Studying the plastic permanent deformations in hot mix asphalt (HMA) is very important to obtain useful information for mix designers as an appropriate mix design will reduce the formation of unevenness on road surface. To investigate the effect of mi
    Read More
  • Material transfer grows in popularity
    June 18, 2012
    Material transfer vehicles (MTVs) have become more and more popular over the years, particularly for large paving projects. These machines can help reduce materials segregation issues and also allow a more even heat profile in the mat, for more homogenous compaction. Roadtec has long held a strong position in this segment, with its highly successful Shuttle Buggy machine, which continues to be improved. However Roadtec is also now facing increasing competition from rival firms offering their own machines
    Read More

Highlighted Content