Skip to main content

Efficient construction leads to quality roads

Technology to assist the installation of quick laying, yet top-quality, road surfaces requiring less frequent repair, thus limiting costs and the number of construction sites, is being sought by highways authorities the world over. The European Union devised project ASPHALT (Advanced Galileo Navigation System for Asphalt Fleet Machines) for satellite navigation and fleet management may have found just what such authorities are looking for. Within the scope of the ASPHALT research project MOBA, together wit
November 30, 2012 Read time: 4 mins

Technology to assist the installation of quick laying, yet top-quality, road surfaces requiring less frequent repair, thus limiting costs and the number of construction sites, is being sought by highways authorities the world over.

The European Union devised project ASPHALT (Advanced Galileo Navigation System for Asphalt Fleet Machines) for satellite navigation and fleet management may have found just what such authorities are looking for.

Within the scope of the ASPHALT research project 1228 MOBA, together with Fraunhofer IIS; DKE Aerospace; 206 Dynapac; Teleconsult Austria; and inPosition says it has developed a way of optimising the process flows at construction sites using GNSS technology, from the paving of the asphalt to compaction and, at the same time, networking the machines with one another. In doing so, what MOBA describes as a scalable, high-precision and cost-effective system interlinks the satellite-based positioning and the steering and control systems of the deployed machines.

Initial field tests took place in late 2011 on Germany's A111 highway outside of Berlin. ASPHALT was said to not only impress the machine operators, but also construction companies and state, national and EU decision makers.

MOBA says the project results are “groundbreaking”, as while GNSS technology is being applied with increasing frequency in the area of earthwork and for monitoring tasks, satellite-based position data has very seldom been used previously for asphalt work.

ASPHALT utilises this technology to position the machinery. Trucks, paver and rollers deployed at the construction site on the A111 highway were equipped with receivers specially developed for the project. Currently, these work with GPS signals and, once available, will work with Galileo. Furthermore, with RTK (Real Time Kinematik), MOBA says the position signal can be improved down to centimetre precision in order to fulfill asphalt construction needs. By combining GNSS and inertial sensor technology, even short distances, under bridges for example, can be circumvented without satellite reception.

"With the compiled data, the entire asphalting process can be optimised and the deployment of the machines reciprocally coordinated", said MOBA project manager Marcus Watermann.

The networking of the machinery is said by MOBA to be a very promising aspect for improving the quality in road construction while, at the same time, saving time and money through quick completion of work at construction sites.

In addition to the material properties, the quality of the pavement is also particularly dependent upon the material provision, the process handling during the asphalting and control of the paver and the screed. The application and compacting temperature, and the compaction itself, are further parameters that are decisive for the properties of the road.

With ASPHALT, material movements are said to be monitored from the applying of the asphalt up to the paver. The system can be used to coordinate the transport of the asphalt to construction site and make it easier for the driver to dock the truck to the paver. This way, no disruption of the flow of material can occur and the asphalt is, according to MOBA, applied in the optimum temperature range.

Furthermore, with the MOBA-matic levelling system and Sonic-Ski, the layer thickness is regulated in such a way that a smooth, even road surface is said to be provided and unevenness prevented.
During the asphalting, the temperature of the applied material is monitored by MOBA Pave-IR. This offers substantiating documentation that the material is being applied at the correct temperature. The MOBA MCA-2000 roller system supports roller drivers when compacting by measuring the asphalt temperature and monitoring the number of the repeated passes over the pavement. Incorrect compaction is said to be prevented this way. Networking of the machines with their positional data ensures that the rollers compact the material at locations with the appropriate temperature range.

With ASPHALT, MOBA says time and money can be saved because a time buffer is no longer needed, unnecessary transport trips are avoided and no redundant material is delivered or used. All data can also be automatically recorded and documented. ASPHALT also offers large potential for saving to communities in urban and rural areas: Thanks to better road quality, maintenance costs reduce, and repairs become more seldom or are only necessary at greater time intervals. If the service life of roads is increased by just 10%, this already means an annual saving of €4.5 billion in Europe. Less maintenance need means fewer resources are consumed, which is more environmentally friendly.

MOBA claims that by using ASPHALT, the number of traffic jams on highways – 15% of which are caused by construction sites in Germany,  thus making them the second most frequent cause of traffic jams (after traffic overload) – are also reduced.

For more information on companies in this article

Related Content

  • Rapid adoption of GPS machine control
    April 5, 2012
    The high sophistication of GPS machine control systems has resulted in a fast pace of technological advancement. The three major players in the machine control sector, Leica Geosystems, Topcon and Trimble have all made major gains in recent years. The sophistication of the latest systems can combine satellite position data from the GPS and GLONASS networks with information from total stations to provide precise, high speed machine operation. Further more the firms have also prepared themselves for the intro
  • Advancing asphalt paving technology
    April 5, 2016
    Asphalt paver manufacturers are meeting demands for high performance machines that can deliver a quality mat - Mike Woof reports Major manufacturers are rolling out ranges of new asphalt pavers designed to meet the latest emissions regulations for Europe, as well as developing models to suit customers in developing nations. The firms have designed many of the latest machines to meet tough new emissions legislation, although versions will also be available for less regulated markets also. Ammann has up
  • MOBA introduces sophisticated compaction tool
    August 17, 2015
    MOBA is introducing a sophisticated compaction control package. The innovative MCA-500 machine control system is designed for use with compactors and can be used in both earthmoving and road construction applications. The system allows the compactor operator to monitor progress in real-time on the display. The driver can see key information during the compaction process, such as the intelligent compaction value (ICV), vibration frequency and amplitude. This ensures that over- and under-compaction can be
  • Paving lower temperature asphalt
    June 28, 2021
    Equipment from Vögele and Hamm has been used to build a carriageway with reduced-temperature asphalt in Germany. The equipment was required for paving a road tunnel in Kahrlsruhe. Tough conditions were applied to paving in the road tunnel under the Kriegsstrasse road.