Denver Airport runway rebuild

Concrete paving equipment from GOMACO has been playing an important role in rebuilding the runway at Denver International Airport in Denver, Colorado, US. One of the first GOMACO GP-4000 pavers equipped with the latest G+ control system has been used to carry out resurfacing work on the Denver International Airport for Villalobos Concrete Company. The four-track GP-4000 machine has been used to slipform paving passes 7.6m wide and 457mm thick for the new runway surface. To ensure that the machine delivered
December 7, 2017 Read time: 1 min

Concrete paving equipment from 218 GOMACO has been playing an important role in rebuilding the runway at Denver International Airport in Denver, Colorado, US. One of the first GOMACO GP-4000 pavers equipped with the latest G+ control system has been used to carry out resurfacing work on the Denver International Airport for Villalobos Concrete Company. The four-track GP-4000 machine has been used to slipform paving passes 7.6m wide and 457mm thick for the new runway surface. To ensure that the machine delivered a quality surface it was equipped with the latest 3D guidance system from Leica Geosystems.

This was the first time that the contractor had utilised stringless paving technology but the firm was able to adapt to the new system and its many advantages.

Connected Construction

For more information on companies in this article

Related Content

  • Wirtgen slipform paver works in Brazil road contract
    May 15, 2015
    Local contractor Galvão Engenharia opted to use an SP 850 slipform paver from Wirtgen as one of the key machines in the job to upgrade and improve the Anel Viário de Fortaleza. This important highway connects Fortaleza, located in the federal state of Ceará, with the busy port of Pecém. The deepwater port in Pecém is some 60km from Fortaleza and since it was inaugurated in 2002, the city has become a primary port for exporting fruit products in refrigerated containers. Fuel and liquefied gas, fertilizer
    Read More
  • Silver Star marries a Topcon GPS system to a Power Curber 5700-C
    January 19, 2016
    In the US state of Oklahoma, Silver Star Construction has adopted 3D technology for site modelling and stringless machine control The company, based in the town of Moore, recently used a Topcon Millimeter GPS system mounted on one of their Power Curber 5700-Cs to put down nearly 5,500m of curb and gutter in a residential housing addition in south-west Oklahoma City. Once the dirt work and grading was completed, the concrete crew got to work by mounting the Topcon receivers on their 5700-C. The Topcon
    Read More
  • Brisbane’s Airport: Innovative Management of One of the World’s Busiest Runways
    June 26, 2014
    When it comes to runways, there are few busier then Brisbane’s main runway. Servicing both domestic and international travel, with over 200,000 movements per year, operating without a curfew Brisbane’s main runway is the busiest in Australia. For maintenance, crews only have a limited period of time to determine the pavement condition, normally during the night, making the detection of pavement faults difficult. To resolve this issue, a new high speed pavement scanner was used to rapidly survey the pavem
    Read More
  • Roadtec machines rebuild key highway in Texas
    December 16, 2013
    In the middle of central Texas lies Blanco County, which is in the state’s Hill Country. West of Austin and north of San Antonio, the county is traversed by the Blanco River and the Pedernales River, and two major highways, US Highway 290 and US Highway 281. Because of the proximity to two major cities, the highways carry heavy traffic volumes and US 281 in particular was in need of repair.
    Read More

Highlighted Content