Denver Airport runway rebuild

Concrete paving equipment from GOMACO has been playing an important role in rebuilding the runway at Denver International Airport in Denver, Colorado, US. One of the first GOMACO GP-4000 pavers equipped with the latest G+ control system has been used to carry out resurfacing work on the Denver International Airport for Villalobos Concrete Company. The four-track GP-4000 machine has been used to slipform paving passes 7.6m wide and 457mm thick for the new runway surface. To ensure that the machine delivered
December 7, 2017 Read time: 1 min

Concrete paving equipment from 218 GOMACO has been playing an important role in rebuilding the runway at Denver International Airport in Denver, Colorado, US. One of the first GOMACO GP-4000 pavers equipped with the latest G+ control system has been used to carry out resurfacing work on the Denver International Airport for Villalobos Concrete Company. The four-track GP-4000 machine has been used to slipform paving passes 7.6m wide and 457mm thick for the new runway surface. To ensure that the machine delivered a quality surface it was equipped with the latest 3D guidance system from Leica Geosystems.

This was the first time that the contractor had utilised stringless paving technology but the firm was able to adapt to the new system and its many advantages.

Connected Construction

For more information on companies in this article

Related Content

  • Concrete paving a smoother surface using machine control technology
    May 17, 2017
    Innovative technology has been used to deliver a smooth concrete road surface on a busy stretch of highway in Nebraska. Much-needed work on a busy section of Interstate 80 has been carried out in Nebraska to improve the road surface. This is one of the most important highways in the US, providing a link that stretches right across the country between the east and west coasts. This busy highway carries a high percentage of heavy truck traffic as it is a vital transport route. However this constant flow of la
    Read More
  • Major upgrade for Chicago O’Hare Airport
    August 14, 2015
    Internationally, airports are being upgraded and expanded to increase capacity and safety – Mike Woof writes. All around the world, airports are being expanded and upgraded, both to cope with massive increases in passenger numbers and also to handle larger aircraft. Runways have to be rebuilt with stronger structures and surfaces to handle greater air traffic volumes as well as increased loads from larger aeroplanes. Building airport runways, however, poses many challenges for construction crews. Paving qua
    Read More
  • Developments in concrete pavers boosts quality
    July 13, 2012
    The latest technology continues to improve the quality of concrete paving while contractors are also benefiting from more adaptable equipment - Mike Woof reports For many concrete paving applications, versatility is required rather than a high production rate. Leading paver manufacturers such as GOMACO, Power Curbers, Terex and Wirtgen all offer high mobility machines that can be adjusted to cope with an array of tasks. For a contractor, the advantage of these smaller pavers is that they can be configured q
    Read More
  • Gomaco smooth the way for new NY State concrete highway
    April 2, 2014
    When New York State Thruway wanted to experiment with unbonded concrete overlays, they chose an 8km, four-lane section of Interstate 90 near Hamburg as their test section. Surianello General Concrete, based in Buffalo, New York, won the bid to pave the 22.9cm thick concrete overlay. The age and the design of the original roadway created a major paving challenge. It was built in the 1950s and didn’t conform to current geometry requirements for superhighways. “They built it with a standard crown sectio
    Read More

Highlighted Content