Denver Airport runway rebuild

Concrete paving equipment from GOMACO has been playing an important role in rebuilding the runway at Denver International Airport in Denver, Colorado, US. One of the first GOMACO GP-4000 pavers equipped with the latest G+ control system has been used to carry out resurfacing work on the Denver International Airport for Villalobos Concrete Company. The four-track GP-4000 machine has been used to slipform paving passes 7.6m wide and 457mm thick for the new runway surface. To ensure that the machine delivered
December 7, 2017 Read time: 1 min

Concrete paving equipment from 218 GOMACO has been playing an important role in rebuilding the runway at Denver International Airport in Denver, Colorado, US. One of the first GOMACO GP-4000 pavers equipped with the latest G+ control system has been used to carry out resurfacing work on the Denver International Airport for Villalobos Concrete Company. The four-track GP-4000 machine has been used to slipform paving passes 7.6m wide and 457mm thick for the new runway surface. To ensure that the machine delivered a quality surface it was equipped with the latest 3D guidance system from Leica Geosystems.

This was the first time that the contractor had utilised stringless paving technology but the firm was able to adapt to the new system and its many advantages.

Connected Construction

For more information on companies in this article

Related Content

  • New solutions for 3D concrete paving controls
    February 20, 2012
    In concrete paving, Leica Geosystems has long held the dominant position in the market for stringless 3D controls. The company's products are well-accepted by contractors and have been used on an array of machines from different manufacturers with a high degree of success in recent years. GOMACO has been working with Leica Geosystems for some time and the two companies set up a partnership recently. This combination technology and business relationship has seen the placement of personnel from Leica Geosyste
    Read More
  • Concrete - a competitive option for road construction?
    February 10, 2012
    The use of advanced control technology help boost the percentage of roads built using concrete - Mike Woof reports New technologies mean that concrete offers a highly competitive option for road construction.
    Read More
  • Concrete paving meets demanding airport conditions
    July 11, 2012
    High speed, high quality concrete paving can be achieved in the demanding airport environment using the latest equipment. Minnich Manufacturing has developed a novel dowel pin drilling machine and has successfully tested this equipment at Tyndall Air Force Base in Panama City, Florida. The A-5SCW is a self-propelled, cantilevered machine that features a wireless remote control and is designed to install five dowel pins simultaneously. The control system has been developed by Wisconsin Kar-Tech and uses prov
    Read More
  • Airport runway rebuild at Bologna
    May 15, 2019
    Rebuilding a runway requires special attention to detail to maximise efficiency and safety Airport runways face special challenges with regard to the loads they carry on a daily basis, particularly when aircraft are landing. A modern jet aircraft will typically land at speeds of around 240-260km/h, with a laden 747 weighing as much as 265tonnes at the end of a long flight. The stresses these large aircraft place on runway surfaces are enormous and not just with the massive impact forces exerted during
    Read More

Highlighted Content