Cat’s wider range

Caterpillar is offering new machine control packages for use with dozers Caterpillar is widening its range of solutions for dozers with the introduction of the GRADE with 3D system for its D3K2, D4K2 and D5K2 models. This package is an automated grade control system using GNSS technology to position the machine's blade, without operator input, from first rough cut to finish grade. In addition, GRADE with 3D incorporates the Cat AccuGrade Ready Option. This system allows the use of universal-total-stati
May 20, 2019 Read time: 3 mins
Caterpillar is offering new machine control packages for use with dozers
178 Caterpillar is widening its range of solutions for dozers with the introduction of the GRADE with 3D system for its D3K2, D4K2 and D5K2 models.


This package is an automated grade control system using GNSS technology to position the machine's blade, without operator input, from first rough cut to finish grade. In addition, GRADE with 3D incorporates the Cat AccuGrade Ready Option. This system allows the use of universal-total-station and laser references for automated control. The new package means that operators of all skill levels can reach specified grades faster and more accurately. The system also helps to reduce staking costs and the need for reworking, reducing fuel consumption and machine hours.

Cat GRADE with 3D is an optional system, installed at the factory and integrated into the machine. The GNSS antennas are mounted on top of the cab, eliminating the need for mast-mounted antennas on the blade, along with related cables. GNSS receivers and a data radio are also housed in the roof structure. Three inertial measurement units (IMUs) monitor machine orientation, and position-sensing hydraulic cylinders monitor blade position. The integrated installation eliminates the need to remove components at the end of each shift.

In GNSS mode, GRADE with 3D can provide high accuracy by employing real-time kinematic positioning technology. This integrates multiple satellite signals with information from an on-site, base-station receiver or other correction device. The system compares machine location and cutting-edge position relative to an on-board design plan, automatically positioning the blade via an integrated, electro-hydraulic valve module.

The system delivers this information to the operator via an in-cab display., while control buttons for activating the system are integrated into the joystick levers.

GRADE with 3D, when activated, automatically controls the movement of the machine's blade, both lift and tilt, to conform to digital jobsite plans. The only input required of the operator is to steer the machine, reducing overall manual input required by an estimated 80%. The new system is optimised to work with other Caterpillar dozing features such as AutoCarry, which is designed to allow optimum blade loads in varying ground conditions, while reducing track slip. GRADE with 3D can increase productivity by as a much as 50% on some projects according to Caterpillar.

As an alternative to the factory-installed GRADE with 3D system, machines can be ordered with only the AccuGrade Ready Option (which includes the Cat Slope Assist system, sensors, processor, and wiring harnesses). When appropriate, the Sitech Cat dealer can then scale up this technology by installing the required GRADE with 3D components.

Connected Construction

For more information on companies in this article

Related Content

  • Caterpillar's improved dozers with new Grade Control systems
    March 15, 2017
    Caterpillar is now offering its sophisticated 3D Cat Grade Control package on its smaller dozers, the D3K2, D4K2, and D5K2 models. This allows more efficient working along with higher accuracy and productivity, while lowering operating costs. The package has integrated roof-mounted antennas. The AccuGrade Ready Option is part of the package, allowing other Cat GRADE technologies to be used, such as AccuGrade Laser or a universal total station when satellite reception is limited. The system provides an
    Read More
  • Using machine control in earthmoving boosts efficiency
    December 19, 2017
    The use of new machine control tools has made a significant boost in earthmoving efficiency. Automated grade control using GNSS signals has transformed how earthmoving contractors get work done. Through the engineering efforts of its innovators and developers, machine control technology has been improved and refined over the years. A development in the ongoing evolution of machine control technology is Topcon Positioning Systems’ introduction of its 3D-MCMAX integrated 3D dozer system. Most notably, the
    Read More
  • GPS machine control improves construction accuracy
    February 29, 2012
    The latest GPS systems will improve the accuracy of many construction operations. Mike Woof reports. The pace of technological advancement is fast in the GPS market. Despite a market downturn, the GPS solution providers continue to invest in research and development. And there is evidence to suggest that the contracting sector is more keen than ever to employ the latest technology because of the cost benefits this can bring.
    Read More
  • Construction adapting with Machine control Technologies
    June 18, 2015
    Machine control technologies are revolutionising construction – Dan Gilkes writes Electronic control of engines, transmissions and hydraulic systems, primarily to reduce exhaust emissions and boost productivity, is also providing manufacturers with an opportunity to incorporate increasingly complex machine control into their equipment. This in turn has the potential to make the machinery more productive, further cutting fuel consumption as part of a virtuous operational circle.
    Read More

Highlighted Content