Skip to main content

New software tools for the highway sector will optimise efficiency

New software development will help ease deliver more efficient operations to the highway sector - Adrian Greeman reports Traffic modelling and simulation tools are being used for real-time analysis on a large scale traffic control system in Italy. A new traffic control system for the huge Piedmont region in northern Italy begins trial operations this summer after an eighteen month development and installation process. It will be the largest ever installed by German traffic engineering company PTV, via
August 22, 2013 Read time: 4 mins

New software development will help ease deliver more efficient operations to the highway sector - Adrian Greeman reports

Traffic modelling and simulation tools are being used for real-time analysis on a large scale traffic control system in Italy. A new traffic control system for the huge Piedmont region in northern Italy begins trial operations this summer after an eighteen month development and installation process. It will be the largest ever installed by German traffic engineering company 5271 PTV, via its local firm SISTeMA, which makes the well-known Visum traffic analysis and Vissim simulation software suite.

The system is being developed for a joint venture public company 5t, which is owned by the city of Turin and the regional authority and has responsibility for the traffic.

It works using traffic modelling principles, via PTV's new Optima program, applied to real-time traffic monitoring and control. Modelling capacities of the software help analyse the large scale network. The software will also run continuous "what-if" scenarios to allow operators to more effectively choose strategies to deal with congestion hot-spots, accidents and maintenance closures.  

The seeming exponential increase of computer power is opening up more and more possibilities for modelling and simulation software. Now able to run very quickly, the programs can be used immediately to examine networks and predict, in around a minute, the effects of modifying parameters like signalling, message signs and lane control.

The Optima program, similar but separate to Visum, is being used in just this way for a wide and large scale traffic network system covering the entire Piedmont region of northwest Italy. "The scheme extends traffic control from the main city of Turin into the surrounding region" explained SISTeMA CEO Lorenzo Meschini ,"…and this means it covers an enormous area."

Some 3,800km2 of the city is covered and 25,000km of the region almost to the coast and into the Alps.  There will be over 2000 demand zones.

"The project integrates a huge variety of incoming data from conventional sensors like some 1400 road loops, a couple of hundred radar and infrared detectors, and a lot of floating car data. Bringing together the different data transfers and protocols with our data integrator, a kind of 'Rosetta Stone' translation, has been part of the project" he said.

The sensor data gives a system picture every 5 minutes, integrated with the floating data from various car and public transport sources. A central processing centre then distributes the output to control centres and information services such as car navigation systems or the internet. The Optima program, which uses a dynamic traffic assignment model similar to Visum, fills in the gaps in the system. This is done with a prior estimation of daily traffic patterns using within-day macroscopic Dynamic Assignment at equilibrium. Daily congestion points and effects are calculated.

But the system then uses short-term estimation of the actual traffic and travel time evolution, "technically speaking with sequential, rolling horizon, macroscopic Dynamic Network Loading models," said Meschini.

As well as allowing data completion by estimation on unmonitored links, the short- term analysis can forecast the consequences of unexpected events, spotting the impact said Meschini, spotting the impact of accidents for example and then predicting the impact on the system. The program will reproduce vehicle queue effects and spillback onto earlier junctions which might cascade congestion effects elsewhere.

Finally it is then possible to run, very quickly, alternative models of the network where different changes have been made, allowing the operation to assess the impact of changes and remedial measures they might make. Scenarios assess impact at 15, 30 and 45-minute projections.

"Many of these will be pre-configured strategies," said Meschini, “…which can be selected quite fast." The operators then examine the impacts and make the decisions about what to do.

"I suppose it is possible to consider a system eventually being able to automatically choose a scenario based on the calculated scenarios," said Meschini, "But that is a quite a long way off, yet it is possible and you very much need the operators."

The Piedmont system is not the first using Optima but is the first on a large scale and will attract attention, said Meschini.  Particular interest will be to see the effectiveness of PTV's modelling methods which Meschini believes are best suited for large scale networks using reasonable computing power. An alternative is to use microsimulation and mezzo levels tools which other software suppliers, notably 154 Aimsun, have been developing for this kind of use and which they argue give better detail. But these demand much more computer power to make the multiple runs needed, says Meschini.

Meanwhile PTV will make use of the Piedmont experience to consider how the system could extend to pedestrians, public transport and bicycles for example.

For more information on companies in this article

Related Content

  • Airport runway rebuild at Bologna
    May 15, 2019
    Rebuilding a runway requires special attention to detail to maximise efficiency and safety Airport runways face special challenges with regard to the loads they carry on a daily basis, particularly when aircraft are landing. A modern jet aircraft will typically land at speeds of around 240-260km/h, with a laden 747 weighing as much as 265tonnes at the end of a long flight. The stresses these large aircraft place on runway surfaces are enormous and not just with the massive impact forces exerted during
  • Smart constructioon with GIS, GPS design technology
    February 16, 2012
    A UK highway project has benefited from the latest software, GIS and GPS technology, Mike Woof reports. Sophisticated software, GIS and GPS technology has played an important role in a large highway upgrade project in the UK and helping to increase efficiency and drive down construction costs.
  • New industry developments push boundaries of machine control
    May 22, 2014
    A series of innovations in machine control or automation technologies are helping transform the construction industry - Mike Woof writes Equipment manufacturer have made huge advances in machine performance, delivering new models that offer increased capabilities and productivity, while using less fuel. Reliability and uptime too have been improved, with the development of equipment that can forestall unplanned downtime by telling the user when it will require service attention. Meanwhile new engines delive
  • Norway’s record breaking undersea road tunnel
    February 25, 2015
    The world's deepest road tunnel is currently in construction near Stavanger in Norway but is only the prelude to even larger projects - report and photographs by Adrian Greeman. Norway's convoluted coastline of fjords and high mountains is famously scenic but also a major problem for transport and connections. The country has long experience of constructing tunnels as a result. Now a series of tunnels underway, or in design, around the oil industry city of Stavanger will stretch its skills more than usual.