Water removal

Strength and resilience are claimed for the BluTop range of small diameter ductile iron water pipes from Saint-Gobain PAM UK.
February 9, 2012 Read time: 1 min
Saint-Gobain says that its new ductile iron water pipes offer durability and performance and lower whole life costs over alternative systems
Strength and resilience are claimed for the BluTop range of small diameter ductile iron water pipes from 757 Saint-Gobain PAM UK. The products can be used in an array of roadway applications and have recently passed tough testing in the UK at a special event held in conjunction with Anglian Water. BluTop pipes were drilled and tapped at 250mm intervals by a team from Anglian Water. The pipes were then subjected to repeated heavy blows with a lump hammer but no fractures occurred, proving the durability of the BluTop range according to Saint-Gobain. The drilling and tapping was carried out using off-the-shelf Tyco flat-bossed gunmetal saddles and ferrules and standard drilling and tapping equipment carried by most pipeline contractors. Overall service connection time is just 10-15 minutes, confirming the versatility of the BluTop range. Saint-Gobain says that the BluTop products are lighter than traditional ductile iron pipes, but do not lack in strength and resilience compared with conventional products. The firm adds that using this system can provide leak-free reliability, easy handling, reduced installation costs and high water quality even in contaminated ground. The product is available in 90mm, 110mm and 125mm diameters.

For more information on companies in this article

Related Content

  • Caterpillar drill performing in US quarry
    May 11, 2015
    A Caterpillar top hammer rig is said to be working well in a tough granite quarry operation in the US. The MD5150C rig is out-performing down-the-hole (DTH) rigs, with higher productivity and lower fuel consumption. Of note though is the fact that the machine is also delivering comparable hole straightness to the DTH machines. Iron Mountain Quarry is located to the south of St Louis, Missouri and the operation says that overall productivity from its Cat rig is almost double that of the earlier gener
    Read More
  • Caterpillar drill performing in US quarry
    May 11, 2015
    A Caterpillar top hammer rig is said to be working well in a tough granite quarry operation in the US. The MD5150C rig is out-performing down-the-hole (DTH) rigs, with higher productivity and lower fuel consumption. Of note though is the fact that the machine is also delivering comparable hole straightness to the DTH machines. Iron Mountain Quarry is located to the south of St Louis, Missouri and the operation says that overall productivity from its Cat rig is almost double that of the earlier gener
    Read More
  • Rockmore International unveils ROK 550T drill
    April 26, 2018
    Rockmore International has launched its new ROK 550T drill for the European market. The latest addition to the company’s T Series DTH hammer line, the 127mm class product uses the industry-standard QL5/QL50 bit shank, but with the blow tube/foot valve (plastic tube) removed. Pejman Eghdami, Rockmore executive vice president, said: “Plastic parts do tend to break in deep hole drilling, causing the hammer to stop leading to costly downtime. Others have tried removing the plastic tube but they lose a lot of
    Read More
  • Airport's high demands on asphalt and concrete techniques
    July 11, 2012
    Airport runway, taxiway and parking areas make high demands on paving requirements, both with concrete and asphalt techniques. Mike Woof reports. High quality surface finishes are required in airport environments for runways, taxiways and aircraft parking areas. Because of the speed at which aircraft take off and land and the massive forces exerted due to the weight of the aircraft, particularly during landing, runway structures need to be incredibly strong. The surfaces also have to be constructed to very
    Read More

Highlighted Content