Wacker Neuson’s reverse drive site dumper gives operators two points of view

Wacker Neuson’s Dual View DW60 is the firm’s answer to improving operator visibility on forward-tip site dumpers. It affords the use of a reverse drive format, where the entire operator station – seat, steering column and control console – can be spun through 180-degrees.
April 27, 2018 Read time: 1 min
DW60 uses a reverse drive operator’s platform
1651 Wacker Neuson’s Dual View DW60 is the firm’s answer to improving operator visibility on forward-tip site dumpers. It affords the use of a reverse drive format, where the entire operator station – seat, steering column and control console – can be spun through 180-degrees.


This concept allows the operator to spin the seat to manoeuvre the dumper conventionally, by looking over the skip when placing the machine for loading and tipping operations. Then the seat can be turned around for driving across site, so the skip is then behind the operator, creating a clearer vantage point when driving. It also avoids the need for the machine to be reversed away from an excavator.

However, this format does pose the question of whether or not the site dumper will then be classed as an articulated dump truck, and if so, an operator’s licence may need to reflect this.

For more information on companies in this article

Related Content

  • Wacker Neuson vibratory plates cut down on hand-arm vibrations
    January 12, 2015
    Wacker Neuson has improved damping for the centre pole on its reversible vibratory plates to reduce hand-arm vibration below 1.5 m/s², meaning there is no time limit for operation of the machines. The improvements are on machines in the weight class of 300kg to 800kg, or 40kN to 100kN of compaction performance. The diesel-powered vibratory plates DPU 4545, DPU 5545 and DPU 6555 achieve values of less than 1.5 m/s², while the DPU 4045 lies at just 0.9 m/s². Wacker Neuson said the improvements take int
    Read More
  • Wacker Neuson vibratory plates cut down on hand-arm vibrations
    January 12, 2015
    Wacker Neuson has improved damping for the centre pole on its reversible vibratory plates to reduce hand-arm vibration below 1.5 m/s², meaning there is no time limit for operation of the machines. The improvements are on machines in the weight class of 300kg to 800kg, or 40kN to 100kN of compaction performance. The diesel-powered vibratory plates DPU 4545, DPU 5545 and DPU 6555 achieve values of less than 1.5 m/s², while the DPU 4045 lies at just 0.9 m/s². Wacker Neuson said the improvements take int
    Read More
  • GOMACO offers additional capabilities for 9500 at Conexpo
    January 29, 2014
    GOMACO is now increasing the versatility of its 9500 concrete trimmer with the installation of the firm’s proprietary and exclusive G+ control technology and G+ Connect system. With the installation of the G+ system on the 9500 paver, the firm also introduced other updates on allowing the machines capabilities to include trimming, concrete and asphalt placing, and shoulder trimming. The firm says that the wiring in the 9500 operator’s console has been redesigned and a rear steer control is now offered for t
    Read More
  • ACE/AECOM report: private sector and user-pay for English roads
    May 14, 2018
    It’s one minute to midnight for funding England’s roads, according to a timely new report, and the clock’s big hand is pointing to some form of user-pay solution, reports David Arminas Is there any way out of future user-pay funding for England’s highway infrastructure? The answer is a resounding ‘no’, according to the recently published report: Funding Roads for the Future. The brief 25-page document by the London-based Association for Consultancy and Engineering, ACE**, sums up the state of England’s ro
    Read More

Highlighted Content