Wacker Neuson vibratory plates cut down on hand-arm vibrations

Wacker Neuson has improved damping for the centre pole on its reversible vibratory plates to reduce hand-arm vibration below 1.5 m/s², meaning there is no time limit for operation of the machines. The improvements are on machines in the weight class of 300kg to 800kg, or 40kN to 100kN of compaction performance. The diesel-powered vibratory plates DPU 4545, DPU 5545 and DPU 6555 achieve values of less than 1.5 m/s², while the DPU 4045 lies at just 0.9 m/s². Wacker Neuson said the improvements take int
January 12, 2015 Read time: 2 mins
Improved damping makes the Wacker Neuson plate compactors better to operate for long periods
1651 Wacker Neuson has improved damping for the centre pole on its reversible vibratory plates to reduce hand-arm vibration below 1.5 m/s², meaning there is no time limit for operation of the machines.

The improvements are on machines in the weight class of 300kg to 800kg, or 40kN to 100kN of compaction performance. The diesel-powered vibratory plates DPU 4545, DPU 5545 and DPU 6555 achieve values of less than 1.5 m/s², while the DPU 4045 lies at just 0.9 m/s².

Wacker Neuson said the improvements take into account the Directive 2002/44/EC of the European Parliament on minimum health and safety requirements regarding exposure of workers to risks from physical agents, such as vibration.

Not only are the new values below the threshold for hand-arm vibrations of 5 m/s², they are also well below the trigger value of 2.5 m/s². This means there is less statutory documentation for a plant manager to fill out and also less time is spent on instructing employees.

Oliver Kolmar, product manager for reversible vibratory plates at Wacker Neuson, said there is now an optimal balance between manoeuvrability and vibration damping in the centre pole. “The new vibratory plates are precisely guided with little effort and at the same time maintain a high level of operating comfort due to the low hand-arm vibrations,” he said.

As a part of the revision, the throttle lever now has an easily selectable idling position that prevents accidental turning off of the machine. Also, the Bowden cable for engine speed adjustment has been moved inside the centre pole to better protect it from damage.

More stability during transport is also provided by the sturdy centre pole lock, which was taken from the time-tested and proven model DPU 100-70 for all vibratory plates 300kg and above.

For more information on companies in this article

Related Content

  • Utility machines with cutting edge design and efficiency
    May 29, 2013
    Utility machines with standout efficiency and cutting-edge cab design have come onto the market during the first few months of 2013. Guy Woodford looks at some of them. Case Construction Equipment and New Holland Construction have brought out what they claim are the market’s first Tier 4 Final emissions standard midi-excavators. The CX75C SR and CX80C models from Case are said to offer more performance power and greater operator cabin comfort than previous models. Tier 4 Final standards are said to have bee
    Read More
  • Wacker's resale operation
    February 17, 2012
    In an interesting development Wacker Neuson is now promoting sales of used equipment. The firm recently held an equipment auction, with a wide range of units being sold including internal vibrators, pumps, rammers, plates and compact equipment weighing up to 15tonnes.
    Read More
  • Wacker Neuson rebar tiers at Queensferry
    February 7, 2017
    When the Queensferry Crossing over the Forth Estuary opens at the end of 2016, it will be the third landmark bridge to be built spanning this short stretch of water. This 2.7km structure is lying alongside the existing road bridge and the historic rail bridge and is the centrepiece of the upgrade to Scotland’s key cross-Forth transport corridor. Responsible for the construction is Forth Crossing Bridge Constructors – FCBC, a consortium of companies from Germany, Spain, the US and the UK. Construction
    Read More
  • Developments in asphalt compaction machines
    July 4, 2012
    Mike Woof reviews the latest compaction market developments In the run-up to the upcoming World of Asphalt event in Orlando, Florida in March, the leading compaction equipment firms are rolling out upgraded and improved machines. With market conditions tough worldwide, customers are also likely to be encouraged with competitive deals on purchasing new machines and replacing ageing fleets.
    Read More

Highlighted Content