Wacker Neuson vibratory plates cut down on hand-arm vibrations

Wacker Neuson has improved damping for the centre pole on its reversible vibratory plates to reduce hand-arm vibration below 1.5 m/s², meaning there is no time limit for operation of the machines. The improvements are on machines in the weight class of 300kg to 800kg, or 40kN to 100kN of compaction performance. The diesel-powered vibratory plates DPU 4545, DPU 5545 and DPU 6555 achieve values of less than 1.5 m/s², while the DPU 4045 lies at just 0.9 m/s². Wacker Neuson said the improvements take int
January 12, 2015 Read time: 2 mins
Improved damping makes the Wacker Neuson plate compactors better to operate for long periods
1651 Wacker Neuson has improved damping for the centre pole on its reversible vibratory plates to reduce hand-arm vibration below 1.5 m/s², meaning there is no time limit for operation of the machines.

The improvements are on machines in the weight class of 300kg to 800kg, or 40kN to 100kN of compaction performance. The diesel-powered vibratory plates DPU 4545, DPU 5545 and DPU 6555 achieve values of less than 1.5 m/s², while the DPU 4045 lies at just 0.9 m/s².

Wacker Neuson said the improvements take into account the Directive 2002/44/EC of the European Parliament on minimum health and safety requirements regarding exposure of workers to risks from physical agents, such as vibration.

Not only are the new values below the threshold for hand-arm vibrations of 5 m/s², they are also well below the trigger value of 2.5 m/s². This means there is less statutory documentation for a plant manager to fill out and also less time is spent on instructing employees.

Oliver Kolmar, product manager for reversible vibratory plates at Wacker Neuson, said there is now an optimal balance between manoeuvrability and vibration damping in the centre pole. “The new vibratory plates are precisely guided with little effort and at the same time maintain a high level of operating comfort due to the low hand-arm vibrations,” he said.

As a part of the revision, the throttle lever now has an easily selectable idling position that prevents accidental turning off of the machine. Also, the Bowden cable for engine speed adjustment has been moved inside the centre pole to better protect it from damage.

More stability during transport is also provided by the sturdy centre pole lock, which was taken from the time-tested and proven model DPU 100-70 for all vibratory plates 300kg and above.

For more information on companies in this article

Related Content

  • Peri’s new MXK lightweight platform makes London debut
    July 8, 2015
    The new platform system MXK from German-based manufacturer Peri is easily assembled to suit site requirements. The flexible platform system with lightweight brackets is assembled at ground level, using lightweight components – scaffold support bracket stop-end rails, guardrail posts, the scaffold deck and the side mesh barriers PMB. Flexibility is the key, said Peri UK managing director Alasdair Stables during an indoor demonstration day held in the docklands area of the UK capital London. The object
    Read More
  • Innovations in compact construction machines
    February 15, 2012
    2011 has already seen a host of new machine introductions among compact equipment makers, and we take a look at some of them in the utility sector With emissions legislation dominating the introduction of new machines over 130kW, smaller equipment has not been overlooked. Most firms have been working feverishly to produce quieter, more economical and more productive equipment and Japanese maker Takeuchi is a good example, having recently introduced a new 8.5 tonne midi excavator.
    Read More
  • Chicago Pneumatic’s new concrete stars
    May 14, 2014
    Chicago Pneumatic (CP) has unveiled its comprehensive new concrete equipment range. In applications from walls to floor slabs, the range has products to cover every step of the job, from vibration and levelling to finishing and cutting. Freshly poured concrete has air voids which must be removed by vibration to increase its density and finished strength. Depending on the concrete’s depth and slump, this can be achieved using a poker or screed. Customers can now choose mechanical, electric or pneumatic p
    Read More
  • Chicago Pneumatic’s new concrete stars
    May 14, 2014
    Chicago Pneumatic (CP) has unveiled its comprehensive new concrete equipment range. In applications from walls to floor slabs, the range has products to cover every step of the job, from vibration and levelling to finishing and cutting. Freshly poured concrete has air voids which must be removed by vibration to increase its density and finished strength. Depending on the concrete’s depth and slump, this can be achieved using a poker or screed. Customers can now choose mechanical, electric or pneumatic p
    Read More

Highlighted Content