Volvo Penta’s latest generation diesels meet low emissions targets

Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machin
March 7, 2018 Read time: 3 mins
Volvo Penta has a new range of diesels in the 5-16litre capacity range
783 Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machine. A spokesperson for the firm said, “The operator doesn’t have to do anything. It’s completely automatic.”


Each power solution features a high-performance engine with matched exhaust aftertreatment system (EATS), to comply with the next EU emissions level. The company says that its Stage V range is optimised to meet future needs and keeps the highest focus on maximised uptime and fuel efficiency, along with ease of installation, operation and maintenance. The range offers power outputs from 105-565kW.

The top-of-the-range unit is the 16litre D16 diesel, which offers a maximum power of 565kW. It is said to be a robust unit with dual-stage turbo charging which provides high power density, low fuel consumption, and a broad power band with full torque from 1000rpm. As with the D16, the D5, D8, D11 and D13 are designed to maximise uptime and ease of installation, operation and maintenance.  

Fuel efficiency is achieved with common rail fuel injection and fixed geometry turbo. Effective heat management is reached through the use of an air inlet throttle, together with uncooled exhaust gas recirculation (EGR), and the electrical exhaust pressure governor (EPG). This enables the system to function without the need to inject fuel into the exhaust stream to raise the temperature. With this approach, the exhaust gas has an optimal temperature when it passes through the EATS.

The EATS includes: diesel oxidation catalyst (DOC); diesel particulate filter (DPF; for D5-D13 models); selective catalytic reduction (SCR); and ammonia slip catalyst (ASC).

The D5-D13 Stage V engines and EATS are designed to work together to maximise passive regeneration during normal operation. With Volvo Penta’s Stage V approach, there is no high-temperature regeneration due to the fact that sulphur regeneration in the SCR catalyst is not required; only soot regeneration is needed to clean the DPF.

These engines are also offered for use in market areas with less strict regulations on emissions. The firm says that the versions without the emissions control packages share the same footprint, making it easier for a firm to install the engines in construction machines for global use, without requiring design changes to the equipment.

For more information on companies in this article

Related Content

  • Rolls Royce Power ready for Stage V in construction
    February 10, 2016
    Engine manufacturer MTU, a division of Rolls Royce Power Systems, is using a range of technologies to meet the proposed EU Stage V emissions regulations that are expected in 2019. The company’s 1000-1500 engine ranges, with power outputs of 100-480kW, will be available with both one-box and two-box exhaust after treatment solutions, including diesel particulate filters (DPF) and selective catalytic reduction (SCR) with a diesel exhaust fluid. The engines use Daimler commercial vehicle engines as a base and
    Read More
  • Rolls Royce Power ready for Stage V in construction
    January 6, 2017
    Engine manufacturer MTU, a division of Rolls Royce Power Systems, is using a range of technologies to meet the proposed EU Stage V emissions regulations that are expected in 2019. The company’s 1000-1500 engine ranges, with power outputs of 100-480kW, will be available with both one-box and two-box exhaust after treatment solutions, including diesel particulate filters (DPF) and selective catalytic reduction (SCR) with a diesel exhaust fluid. The engines use Daimler commercial vehicle engines as a base and
    Read More
  • Increased output, productive ADTs and excavators
    February 29, 2012
    Productive performers provide increased output for customers in the loading and hauling sector of the earthmoving market - Mike Woof writes. Loading and hauling machines play key roles in earthmoving operations, with the excavator and ADT combination proving both versatile and productive. While machines such as scrapers may be more efficient in specific earthmoving applications, these do not offer the versatility of the excavator and ADT combination, reducing utilisation.
    Read More
  • Smoother surfaces
    September 11, 2014
    Efficient new soil compaction machines featuring the latest technology are now coming to market – Mike Woof reports The start of 2014 has seen a major development for the construction equipment sector, with the Tier 4 Final emissions requirements at last beginning to take effect. The implications of the drive towards the introduction of low emission engine technology have been seen right across the off-highway machinery equipment industry, and the soil compaction segment is no exception.
    Read More

Highlighted Content