Volvo Penta’s latest generation diesels meet low emissions targets

Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machin
March 7, 2018 Read time: 3 mins
Volvo Penta has a new range of diesels in the 5-16litre capacity range
783 Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machine. A spokesperson for the firm said, “The operator doesn’t have to do anything. It’s completely automatic.”


Each power solution features a high-performance engine with matched exhaust aftertreatment system (EATS), to comply with the next EU emissions level. The company says that its Stage V range is optimised to meet future needs and keeps the highest focus on maximised uptime and fuel efficiency, along with ease of installation, operation and maintenance. The range offers power outputs from 105-565kW.

The top-of-the-range unit is the 16litre D16 diesel, which offers a maximum power of 565kW. It is said to be a robust unit with dual-stage turbo charging which provides high power density, low fuel consumption, and a broad power band with full torque from 1000rpm. As with the D16, the D5, D8, D11 and D13 are designed to maximise uptime and ease of installation, operation and maintenance.  

Fuel efficiency is achieved with common rail fuel injection and fixed geometry turbo. Effective heat management is reached through the use of an air inlet throttle, together with uncooled exhaust gas recirculation (EGR), and the electrical exhaust pressure governor (EPG). This enables the system to function without the need to inject fuel into the exhaust stream to raise the temperature. With this approach, the exhaust gas has an optimal temperature when it passes through the EATS.

The EATS includes: diesel oxidation catalyst (DOC); diesel particulate filter (DPF; for D5-D13 models); selective catalytic reduction (SCR); and ammonia slip catalyst (ASC).

The D5-D13 Stage V engines and EATS are designed to work together to maximise passive regeneration during normal operation. With Volvo Penta’s Stage V approach, there is no high-temperature regeneration due to the fact that sulphur regeneration in the SCR catalyst is not required; only soot regeneration is needed to clean the DPF.

These engines are also offered for use in market areas with less strict regulations on emissions. The firm says that the versions without the emissions control packages share the same footprint, making it easier for a firm to install the engines in construction machines for global use, without requiring design changes to the equipment.

For more information on companies in this article

Related Content

  • Lyndon Thomas takes biggest UK order for Doosan Trucks
    January 12, 2017
    Contractor Lyndon Thomas, in Northampton, England, has taken delivery of eight Doosan DA30-5 articulated dump trucks - the biggest single UK order for Doosan trucks. The order also confirms Lyndon Thomas as the owner of the largest fleet of dump trucks in the East Midlands area. Established in 2010, Lyndon Thomas offers a range of services including earthmoving, contract crushing and screening, plant hire, demolition and distribution of all types of aggregate. The Stage IV trucks were purchased along
    Read More
  • Doosan’s powerful yet fuel efficient wheeled loaders
    April 23, 2013
    High engine power combined with reduced fuel consumption are said to be key qualities of Doosan’s new DL200-3 and DL250-3 wheeled loaders. Both new models are also said by the South Korean firm to provide better operator comfort, exceptional performance, ease of handling, easier serviceability and extended durability. The wheeled loaders’ new cab design is said to offer greater visibility thanks to a wider front glass section and an extended wiper blade area. Now that the reservoir for the wiper water is l
    Read More
  • Deutz introduces high torque engines
    April 13, 2016
    Deutz used bauma 2016 to introduce two new high-torque variants of its TCD sub-4litre engines. These include the TCD 2.9 and TCD 3.6 engines. Where the 2.9litre TCD 2.9 has been re-tuned to produce a maximum torque figure of 375Nm, the TCD 3.6 has been tweaked to deliver 390Nm. Importantly, Deutz said both engines remain below the 56kW emissions threshold for Stage V, so they do not require SCR to clean up exhaust gases.
    Read More
  • More muscle for Cat’s C9.3 engine as it heads for Stage V
    April 19, 2016
    Caterpillar’s industrial engines division has introduced a new version of its venerable C9.3 Acert engine. Badged the C9.3B, the new power unit retains its six-cylinder, 9.3litre format, but with the deletion of EGR, revised air handling, improved fuel injection and improved electronics, the engine is said to be ready to meet anticipated Stage V emissions regulations.
    Read More

Highlighted Content