Volvo Penta’s latest generation diesels meet low emissions targets

Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machin
March 7, 2018 Read time: 3 mins
Volvo Penta has a new range of diesels in the 5-16litre capacity range
783 Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machine. A spokesperson for the firm said, “The operator doesn’t have to do anything. It’s completely automatic.”


Each power solution features a high-performance engine with matched exhaust aftertreatment system (EATS), to comply with the next EU emissions level. The company says that its Stage V range is optimised to meet future needs and keeps the highest focus on maximised uptime and fuel efficiency, along with ease of installation, operation and maintenance. The range offers power outputs from 105-565kW.

The top-of-the-range unit is the 16litre D16 diesel, which offers a maximum power of 565kW. It is said to be a robust unit with dual-stage turbo charging which provides high power density, low fuel consumption, and a broad power band with full torque from 1000rpm. As with the D16, the D5, D8, D11 and D13 are designed to maximise uptime and ease of installation, operation and maintenance.  

Fuel efficiency is achieved with common rail fuel injection and fixed geometry turbo. Effective heat management is reached through the use of an air inlet throttle, together with uncooled exhaust gas recirculation (EGR), and the electrical exhaust pressure governor (EPG). This enables the system to function without the need to inject fuel into the exhaust stream to raise the temperature. With this approach, the exhaust gas has an optimal temperature when it passes through the EATS.

The EATS includes: diesel oxidation catalyst (DOC); diesel particulate filter (DPF; for D5-D13 models); selective catalytic reduction (SCR); and ammonia slip catalyst (ASC).

The D5-D13 Stage V engines and EATS are designed to work together to maximise passive regeneration during normal operation. With Volvo Penta’s Stage V approach, there is no high-temperature regeneration due to the fact that sulphur regeneration in the SCR catalyst is not required; only soot regeneration is needed to clean the DPF.

These engines are also offered for use in market areas with less strict regulations on emissions. The firm says that the versions without the emissions control packages share the same footprint, making it easier for a firm to install the engines in construction machines for global use, without requiring design changes to the equipment.

For more information on companies in this article

Related Content

  • FPT Industrial ready for Stage V standard
    April 23, 2015
    With the introduction of Stage V/Tier 5 emissions regulations set for 2019-2020, depending on engine power output, FPT Industrial says that it will build upon its SCR-only strategy, remaining one of the few manufacturers not adopting Exhaust Gas Recirculation (EGR) to meet the standard. The Italian firm’s Hi-eSCR after-treatment system, already in use on Stage IV/Tier 4 Final engines, maximises in-engine combustion technology without using EGR. This saves weight, cost and space for the equipment manufacture
    Read More
  • Developments in diesel technology are a focus for producers
    January 19, 2016
    The diesel engine manufacturers are continuing their development of low emission engines as well as solutions for markets where fuel quality is an issue - Mike Woof writes. Developments in diesel engine technology are the continued focus for manufacturers facing tough challenges around the world. New low emission engines are being developed for developed markets such as Europe and the US, with Europe now taking a further step ahead to target pollutants from the tailpipe. Meanwhile firms are also looking int
    Read More
  • Deutz develops low emission diesel range
    January 6, 2017
    The new Tier 4 Final/Stage IV emission certified engine range from Deutz is being introduced. This complete line-up of diesels meets the coming noise and exhaust emission requirements in Europe and the US and offers capacities from 2.9-16litres. The low emissions performance is achieved using the Deutz DVERT technology, a package of technical solutions that is used in modular form with varying options used to ensure each engine capacity meets the requirements. Compact design and high torque output are claim
    Read More
  • Deutz develops low emission diesel range
    February 6, 2013
    The new Tier 4 Final/Stage IV emission certified engine range from Deutz is being introduced. This complete line-up of diesels meets the coming noise and exhaust emission requirements in Europe and the US and offers capacities from 2.9-16litres. The low emissions performance is achieved using the Deutz DVERT technology, a package of technical solutions that is used in modular form with varying options used to ensure each engine capacity meets the requirements. Compact design and high torque output are claim
    Read More

Highlighted Content