Volvo Penta’s latest generation diesels meet low emissions targets

Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machin
March 7, 2018 Read time: 3 mins
Volvo Penta has a new range of diesels in the 5-16litre capacity range
783 Volvo Penta has a full line-up of diesel engines for the 5, 8, 11, 13 and 16litre capacity range. These are available in low emissions, Stage V compliant variants. For the 5, 8 and 11 litre engines, particulate filters and SCR systems are used in the emissions control package to meet the stage V requirements. Meanwhile the 13 and 16litre engines feature an SCR system that is integrated with the particulate filter. Passive regeneration is used for the particulate filters, so there is no need to stop a machine. A spokesperson for the firm said, “The operator doesn’t have to do anything. It’s completely automatic.”


Each power solution features a high-performance engine with matched exhaust aftertreatment system (EATS), to comply with the next EU emissions level. The company says that its Stage V range is optimised to meet future needs and keeps the highest focus on maximised uptime and fuel efficiency, along with ease of installation, operation and maintenance. The range offers power outputs from 105-565kW.

The top-of-the-range unit is the 16litre D16 diesel, which offers a maximum power of 565kW. It is said to be a robust unit with dual-stage turbo charging which provides high power density, low fuel consumption, and a broad power band with full torque from 1000rpm. As with the D16, the D5, D8, D11 and D13 are designed to maximise uptime and ease of installation, operation and maintenance.  

Fuel efficiency is achieved with common rail fuel injection and fixed geometry turbo. Effective heat management is reached through the use of an air inlet throttle, together with uncooled exhaust gas recirculation (EGR), and the electrical exhaust pressure governor (EPG). This enables the system to function without the need to inject fuel into the exhaust stream to raise the temperature. With this approach, the exhaust gas has an optimal temperature when it passes through the EATS.

The EATS includes: diesel oxidation catalyst (DOC); diesel particulate filter (DPF; for D5-D13 models); selective catalytic reduction (SCR); and ammonia slip catalyst (ASC).

The D5-D13 Stage V engines and EATS are designed to work together to maximise passive regeneration during normal operation. With Volvo Penta’s Stage V approach, there is no high-temperature regeneration due to the fact that sulphur regeneration in the SCR catalyst is not required; only soot regeneration is needed to clean the DPF.

These engines are also offered for use in market areas with less strict regulations on emissions. The firm says that the versions without the emissions control packages share the same footprint, making it easier for a firm to install the engines in construction machines for global use, without requiring design changes to the equipment.

For more information on companies in this article

Related Content

  • Yanmar shows new engines at INTERMAT
    February 6, 2012
    Yanmar Europe is using INTERMAT to reveal a new series of water-cooled industrial diesel engines that meet the new EPA Tier 4 and EU Stage IIIB off-highway emission regulations up to 56kW. Based on its TNV series, the new range includes 10 models in three- and four-cylinder formats with indirect and direct injection, and ranging from 10kW to 56kW. Four of these new engines, the 3TNV80F, 3TNV88C, 3TNV86CT and 4TNV98C, are at INTERMAT 2012. Engines over 19kW use an ECU-controlled common rail fuel injection, c
    Read More
  • JCB introduces compact telehandler that meets emission regulations
    January 24, 2014
    JCB is expanding its telehandler line-up with the addition of the compact 525-60 at Conexpo. According to the firm, the 525-60 offers full-size telehandler performance in a compact chassis. Maximum lift height is 6m and its load capacity is 2.5 tonnes, while the 525-60 is just 1.8m wide and 1.91m tall. This allows it to be operated in sites with limited space. The 525-60 Hi-Viz replaces the rear-engined 524-50, 527-55 and the 520-50 models, and features a side-mounted engine design. This permits a low boom
    Read More
  • Rubber tyre compactors improved
    November 16, 2021
    HAMM is offering new models for asphalt compaction in the shape of its latest compact pneumatic roller and its full-sized pneumatic machines
    Read More
  • New asphalt pavers deliver better surface quality
    February 13, 2012
    Progressive paving improvements are offering better surface quality
    Read More

Highlighted Content