Skip to main content

Ukraine opts for Kistler

Ukraine is working to set up 250 weigh-in-motion stations by 2025 in an effort to tackle rapidly increasing road damage by overweight vehicles
October 14, 2021 Read time: 2 mins
Because of the slim shape of Kistler’s Lineas quartz WIM sensors no massive cuts in the road are necessary for installation (image courtesy Kistler Group)

Already, 45 WIM stations – around half of them using Kistler’s Lineas quartz WIM sensors - have been set up on crucial transport routes across Ukraine.

The WIM stations allow Ukrainian authorities to automatically fine overloaded trucks. In addition, authorities will be able to analyse the data to help predict when a given road surface will need replacement or where further infrastructure development might be beneficial.

In Ukraine, the rapid decay of road surfaces has long been a major issue for Ukravtodor, the state agency responsible for maintaining the country’s major roads. Almost immediately after a road has been constructed or repaired, damage starts to appear. In the capital Kiev, the problem is most acute. About 40% of all trucks on the road in and around the city are either overweight or violate size restrictions.

On the agency’s website, Oleksandr Kubrakov, chairman of Ukravtodor comments that if everything is left as it is, a newly constructed road’s lifespan is a mere two years. To prevent this scenario, the national government launched a campaign to combat weight violations on Ukrainian roads that includes large-scale introduction of weigh-in-motion stations to back up the government’s resolve.

They weigh all passing vehicles without disrupting traffic and transmit the data to a control cabinet by the road for analysis. If the vehicle is too heavy, a camera automatically takes a picture of the license plate and sends the collected information to the local authorities, who will then fine the offending driver or logistics company.

Kistler says that Ukraine is not the first eastern European country to install its WIM technology on a large scale to reduce the number of overloaded vehicles. “We have been providing WIM systems for direct enforcement in countries like the Czech Republic, Russia and Hungary for several years now,” says Tomas Pospisek, regional manager for Eastern Europe within the Traffic Solutions business at Kistler Group.

Kistler specialises in piezoelectric sensors, a measurement technology that stands out for its longevity and accuracy even in tough conditions such as high temperatures or fast traffic. “Over the past 20 years, we have continuously made our products more and more accurate to enable direct enforcement. Now we can offer an accuracy around 2% with our KiTraffic Digital System,” says Pospisek.

For more information on companies in this article

Related Content

  • Efficient truck loading to optimise operations
    December 15, 2017
    Accurate technology has been utilised to measure the loads carried by dump trucks on a project in Russia. Specialist supplier LASE commissioned the LaseTVM tool on a road construction site for contractor EuroTransStroy at a construction site in St Petersburg, Russia. The laser-based measurement system is able to determine the volume of bulk materials such as sand and crushed stones with high accuracy. This can be used to prevent differences in loads from one truck to another, so as to ensure consistency.
  • Efficient truck loading to optimise operations
    September 14, 2017
    Specialist supplier LASE commissioned the LaseTVM tool on a road construction site for contractor EuroTransStroy at a construction site in St Petersburg, Russia. The laser-based measurement system is able to determine the volume of bulk materials such as sand and crushed stones with high accuracy. This can be used to prevent differences in loads from one truck to another, so as to ensure consistency. The system also identifies truck license plates and the load area, providing comprehensive data collation.
  • Efficient truck loading to optimise operations
    September 14, 2017
    Specialist supplier LASE commissioned the LaseTVM tool on a road construction site for contractor EuroTransStroy at a construction site in St Petersburg, Russia. The laser-based measurement system is able to determine the volume of bulk materials such as sand and crushed stones with high accuracy. This can be used to prevent differences in loads from one truck to another, so as to ensure consistency. The system also identifies truck license plates and the load area, providing comprehensive data collation.
  • The era of workzone data
    July 4, 2018
    Portable work zone messaging is now integral - not an add-on - when it comes to safety on large-scale highway projects. Andrew Williams* reports. Portable work zone ITS solutions have emerged in recent years as important flexible tools for managing major roadwork projects, from new-build to upgrades. They effectively ensure traffic disruption is kept to a minimum and lives can be saved. As such, the technology forms a central component of a major €1.7 billion project in the southern English county of Cambr