Swedish National Road & Transport Institute (VTI) confirms SEISMIC’s fuel-saving performance

As a ground-breaking addition to the highly popular and versatile CA3500D, the new Dynapac CA3500D SEISMIC Soil Roller continues to demonstrate its effectiveness not only in achieving optimal compaction but in saving fuel on the job site. This was recently confirmed by the Swedish National Road and Transport Research Institute (VTI).
June 1, 2022 Read time: 2 mins

 

Smart, sensational, SEISMIC

In any compaction job, finding the right balance of factors for the best results has always been a science. Fortunately, with the Dynapac CA3500D SEISMIC Soil Roller, achieving, fast, cost-effective compaction while reducing both fuel and emissions is now easier than ever. It all begins with the unique and intelligent SEISMIC technology that automatically enables the roller to determine the optimum frequency for any material to be compacted. At the heart of the system is an onboard machine control unit, as well as a next-generation compaction meter. This game-changing feature makes it possible for SEISMIC to sense the dynamic characteristics of the material and then calculate the optimum frequency required for the best compaction results. The entire process is achieved using an advanced data flow from the SEISMIC Compaction Meter to the onboard machine control unit, which regulates the machine's hydraulics. By working together with the soil, the SEISMIC feature automatically applies the correct amount of energy exactly where and when it's required and can hydraulically change the vibration frequency, every 0.2 seconds for maximum performance.
 
Proven fuel efficiency

SEISMIC’s performance has now been verified by independent sources. Recently, the Swedish National Road and Transport Research Institute supervised a series of fuel consumption tests on the Dynapac CA 3500D SEISMIC Soil Roller. It was tested in three different settings over a period of two weeks. The two test weeks were identical regarding procedures and were performed twice to validate that similar test results were reached. The results spoke for themselves. VTI measured a fuel reduction consumption of 28-35% compared to conventional compaction (fixed frequency). Moreover, they registered a good alignment with the onboard telemetrics, which reported savings of 36-38%. Reduced costs from the reduction of passes were not included in the report. This means that under real job site conditions, there is an overall saving of around 55% to complete the job.

Visit us at bauma 2022 to learn more!

Content produced in association with Dynapac

For more information on companies in this article

Related Content

  • New developments in asphalt compaction
    June 14, 2019
    New developments in asphalt compaction offer performance gains for contractors, with future innovations being unveiled – Mike Woof writes Advanced asphalt compactors are offering huge gains in performance over previous generation machines. Better working quality and finish is claimed for the latest machines, while future developments will offer sophisticated solutions. The new ARX 91 articulated tandem roller from Ammann is designed as a high productivity compactor that can be used on both thin and t
    Read More
  • Improved compaction efficiency
    June 14, 2021
    Caterpillar says that its new GC Series single drum soil compactors benefit from simple operation, low ownership costs and long service intervals. There are five new models being offered, the 10tonne CS10 GC, 11tonne CS11 GC, 11tonne CP11 GC, 12tonne CS12 GC and 12tonne CP12 GC.
    Read More
  • Production starts of new Rammax 1575 CI articulated trench roller
    September 26, 2013
    Following its introduction at bauma 2013, Ammann’s latest articulated Rammax 1575 CI trench roller is going into production at the firm’s Langenthal site in Switzerland. Ammann has more than 40 years’ experience in the construction of these special machines based on the Rammax product range. Today, Ammann is able to offer both articulated trench rollers in the form of the new Rammax 1575 CI and the tried and tested Rammax 1585 with skid steering. Customers can therefore choose the machine that best fulfi
    Read More
  • MOBA introduces sophisticated compaction tool
    August 17, 2015
    MOBA is introducing a sophisticated compaction control package. The innovative MCA-500 machine control system is designed for use with compactors and can be used in both earthmoving and road construction applications. The system allows the compactor operator to monitor progress in real-time on the display. The driver can see key information during the compaction process, such as the intelligent compaction value (ICV), vibration frequency and amplitude. This ensures that over- and under-compaction can be
    Read More

Highlighted Content