Swedish National Road & Transport Institute (VTI) confirms SEISMIC’s fuel-saving performance

As a ground-breaking addition to the highly popular and versatile CA3500D, the new Dynapac CA3500D SEISMIC Soil Roller continues to demonstrate its effectiveness not only in achieving optimal compaction but in saving fuel on the job site. This was recently confirmed by the Swedish National Road and Transport Research Institute (VTI).
June 1, 2022 Read time: 2 mins

 

Smart, sensational, SEISMIC

In any compaction job, finding the right balance of factors for the best results has always been a science. Fortunately, with the Dynapac CA3500D SEISMIC Soil Roller, achieving, fast, cost-effective compaction while reducing both fuel and emissions is now easier than ever. It all begins with the unique and intelligent SEISMIC technology that automatically enables the roller to determine the optimum frequency for any material to be compacted. At the heart of the system is an onboard machine control unit, as well as a next-generation compaction meter. This game-changing feature makes it possible for SEISMIC to sense the dynamic characteristics of the material and then calculate the optimum frequency required for the best compaction results. The entire process is achieved using an advanced data flow from the SEISMIC Compaction Meter to the onboard machine control unit, which regulates the machine's hydraulics. By working together with the soil, the SEISMIC feature automatically applies the correct amount of energy exactly where and when it's required and can hydraulically change the vibration frequency, every 0.2 seconds for maximum performance.
 
Proven fuel efficiency

SEISMIC’s performance has now been verified by independent sources. Recently, the Swedish National Road and Transport Research Institute supervised a series of fuel consumption tests on the Dynapac CA 3500D SEISMIC Soil Roller. It was tested in three different settings over a period of two weeks. The two test weeks were identical regarding procedures and were performed twice to validate that similar test results were reached. The results spoke for themselves. VTI measured a fuel reduction consumption of 28-35% compared to conventional compaction (fixed frequency). Moreover, they registered a good alignment with the onboard telemetrics, which reported savings of 36-38%. Reduced costs from the reduction of passes were not included in the report. This means that under real job site conditions, there is an overall saving of around 55% to complete the job.

Visit us at bauma 2022 to learn more!

Content produced in association with Dynapac

For more information on companies in this article

Related Content

  • New compaction machines, high performance and efficiency
    February 10, 2012
    Soil compaction BOMAG is pushing technological boundaries in the soil compaction sector with the market introduction of its giant 32tonne machines, which was shown in prototype/concept form at bauma in 2007. According to the firm the concept model attracted considerable interest and the company opted to develop the unit for series production. The new BW332 single drum roller is now the heaviest such machine on the market.
    Read More
  • Testing highway materials for best performance
    February 23, 2012
    Big increases in traffic mean that today highways are under greater pressure than ever, and materials have to perform to increasingly higher standards. Modern highways, particularly in and around major cities, are tested like never before, and it is essential that surfaces are built to withstand increasing traffic.
    Read More
  • Rigorous testing for high performance materials
    February 9, 2012
    Today’s highways require high performance materials, and this means rigorous testing as Patrick Smith reports Highways are under greater pressure than ever today and asphalts have to grant high performances in order to withstand traffic and meet the standards. Studying the plastic permanent deformations in hot mix asphalt (HMA) is very important to obtain useful information for mix designers as an appropriate mix design will reduce the formation of unevenness on road surface. To investigate the effect of mi
    Read More
  • Compaction innovations from key firms
    June 12, 2018
    The major manufacturers are introducing an array of advanced asphalt compaction machines - Mike Woof writes. New compaction machines are coming to market from an array of manufacturers, aiming to increase output and efficiency for road contractors. One of the most notable developments is with Hamm’s launch of a production hybrid compactor model, while other firms say they are also working on similar systems. However, several manufacturers have introduced new and improved machines with superior performance t
    Read More

Highlighted Content