Sophisticated weighing for loaders

Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through
January 28, 2014 Read time: 2 mins
Loup Electronics is offering the sophisticated RDS bucket weighing technology to the US market
Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by 7599 Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through a set weighing zone. The system may also be used in static weighing mode; the boom can either be lifted to a set weighing position where the pressure is captured, or measuring constantly in a live mode at any required boom height. Both dynamic and static weighing positions are adjustable by the operator to suit any job required, which will enable the machine to be used at its most efficient output. All calculations are made in the LOADEX 100 Weighing Module, with the resultant calculation sent via CAN protocol to the LOADEX 100 terminal in the cabin. Load and store information is saved in the terminal where it can be distributed to an in-cab printer, modem or internal SD flash card. Also new to North America is the WEIGHLOG VUE on-board weighing scale for wheeled loaders.  An all-new CAN based system combining cutting edge sensor technology and signal processing techniques, the WEIGHLOG VUE provides precise and consistent bucket weight information and emphasises the gains in productivity and profitability that can be achieved with such technology. The system is said to boost loading times, cut cycle times and optimise machine operation. It can be retrofitted onto an array of wheeled loaders and measures hydraulic pressures using up to four sensors. All signals are processed in the RDS Smart Box and the resultant weight calculation is sent to the terminal. There is a blend facility with an infinite number of mixes and products. GPRS or Wi-Fi connectivity provides one or two-way communication with the back office to send and receive job information.








%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92379 0 oLinkExternal www.LoupElectronics.com Loup Electronics web false /EasySiteWeb/GatewayLink.aspx?alId=92379 false false%>

For more information on companies in this article

Related Content

  • LiuGong’s 375B skid steer features curved design
    March 6, 2014
    The curved design of LiuGong’s new 375B skid steer loader improves sight lines and makes the machine stand out. The curves also provide another, much less obvious benefit. “Intelligent use of complex shapes adds another important benefit – reduced noise levels inside the cab,” the company said. “By using curves to increase the stiffness of the cab, surface transmission of sound energy is reduced.” The 375B also features improved weight distribution that enables better balance, stability and control. The n
    Read More
  • LiuGong’s 375B skid steer features curved design
    January 6, 2017
    The curved design of LiuGong’s new 375B skid steer loader improves sight lines and makes the machine stand out. The curves also provide another, much less obvious benefit. “Intelligent use of complex shapes adds another important benefit – reduced noise levels inside the cab,” the company said. “By using curves to increase the stiffness of the cab, surface transmission of sound energy is reduced.” The 375B also features improved weight distribution that enables better balance, stability and control. The n
    Read More
  • ZF shows cPower for wheeled loaders at INTERMAT
    January 6, 2017
    ZF Transmissions used INTERMAT to reveal its cPower continuously variable transmission (CVT) for wheeled loaders up to 210kW. Using experience gained in the agricultural tractor sector, where CVTs have been in use for more than 10 years, ZF’s cPower transmission uses a blend of hydrostatics and mechanical drives to split power throughout the entire working speed range.
    Read More
  • ZF shows cPower for wheeled loaders at INTERMAT
    April 18, 2012
    ZF Transmissions used INTERMAT to reveal its cPower continuously variable transmission (CVT) for wheeled loaders up to 210kW. Using experience gained in the agricultural tractor sector, where CVTs have been in use for more than 10 years, ZF’s cPower transmission uses a blend of hydrostatics and mechanical drives to split power throughout the entire working speed range.
    Read More

Highlighted Content