Sophisticated weighing for loaders

Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through
January 28, 2014 Read time: 2 mins
Loup Electronics is offering the sophisticated RDS bucket weighing technology to the US market
Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by 7599 Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through a set weighing zone. The system may also be used in static weighing mode; the boom can either be lifted to a set weighing position where the pressure is captured, or measuring constantly in a live mode at any required boom height. Both dynamic and static weighing positions are adjustable by the operator to suit any job required, which will enable the machine to be used at its most efficient output. All calculations are made in the LOADEX 100 Weighing Module, with the resultant calculation sent via CAN protocol to the LOADEX 100 terminal in the cabin. Load and store information is saved in the terminal where it can be distributed to an in-cab printer, modem or internal SD flash card. Also new to North America is the WEIGHLOG VUE on-board weighing scale for wheeled loaders.  An all-new CAN based system combining cutting edge sensor technology and signal processing techniques, the WEIGHLOG VUE provides precise and consistent bucket weight information and emphasises the gains in productivity and profitability that can be achieved with such technology. The system is said to boost loading times, cut cycle times and optimise machine operation. It can be retrofitted onto an array of wheeled loaders and measures hydraulic pressures using up to four sensors. All signals are processed in the RDS Smart Box and the resultant weight calculation is sent to the terminal. There is a blend facility with an infinite number of mixes and products. GPRS or Wi-Fi connectivity provides one or two-way communication with the back office to send and receive job information.








%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92379 0 oLinkExternal www.LoupElectronics.com Loup Electronics web false /EasySiteWeb/GatewayLink.aspx?alId=92379 false false%>

For more information on companies in this article

Related Content

  • More output for less fuel from Atlas Weyhausen’s new E Series compact wheeled loaders
    February 15, 2013
    Atlas Weyhausen’s new E Series wheeled loaders will be on display at Bauma with the AR 65e, AR 75e, AR 80e and AR95e Super all on view. Using newly developed Deutz engines, the new wheeled loaders offer up to 12% more output with lower fuel consumption figures. A key design feature of the engines is that they do not contain a particle filter and therefore are easier to maintain, claims the German manufacturer. There is a new steering valve on the E Series too, allowing operators to run the machine electroni
    Read More
  • Heavy duty 560-80handler takes JCB into the high capacity market
    January 6, 2017
    JCB has extended its telescopic handler range, with the addition of a heavy-duty machine that has been designed for tough operating conditions. The 560-80 has a two-stage boom capable of lifting 6,000kg (12,000lb in the US market) with a maximum working height of 8.1m (26’2”), with a 1,750kg (3,750lb for the US) load capacity at full forward reach.
    Read More
  • Heavy duty 560-80handler takes JCB into the high capacity market
    March 3, 2014
    JCB has extended its telescopic handler range, with the addition of a heavy-duty machine that has been designed for tough operating conditions. The 560-80 has a two-stage boom capable of lifting 6,000kg (12,000lb in the US market) with a maximum working height of 8.1m (26’2”), with a 1,750kg (3,750lb for the US) load capacity at full forward reach.
    Read More
  • Scania’s versatile engine design suits a wide range of requirements
    January 6, 2017
    Scania claims that field test of its latest engine designs show that the units meet all the emission and noise requirements of Tier 4 Final/Stage IV. The tests are said to have highlighted the robust nature of these engines in an array of challenging, off-highway working cycles and applications. The company has tested the engines in applications such as excavators, wheel loaders, crushers and dump trucks. Scania’s technology to minimise emissions includes key features as extra-high-pressure injection (Scani
    Read More

Highlighted Content