Sophisticated weighing for loaders

Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through
January 28, 2014 Read time: 2 mins
Loup Electronics is offering the sophisticated RDS bucket weighing technology to the US market
Sophisticated on-board weighing systems for use with wheeled loaders and excavators are being offered by 7599 Loup Electronics. The innovative LOADEX 100 is a retrofittable scale installed on tracked and wheeled excavators and material handlers to weigh the amount of material load in the bucket or grab. Pressure signals are captured, filtered and corrected by measuring the angle of the main boom using either an RDS Inclinometer or Mechanical Angle sensor. When used dynamically, the pressures are captured through a set weighing zone. The system may also be used in static weighing mode; the boom can either be lifted to a set weighing position where the pressure is captured, or measuring constantly in a live mode at any required boom height. Both dynamic and static weighing positions are adjustable by the operator to suit any job required, which will enable the machine to be used at its most efficient output. All calculations are made in the LOADEX 100 Weighing Module, with the resultant calculation sent via CAN protocol to the LOADEX 100 terminal in the cabin. Load and store information is saved in the terminal where it can be distributed to an in-cab printer, modem or internal SD flash card. Also new to North America is the WEIGHLOG VUE on-board weighing scale for wheeled loaders.  An all-new CAN based system combining cutting edge sensor technology and signal processing techniques, the WEIGHLOG VUE provides precise and consistent bucket weight information and emphasises the gains in productivity and profitability that can be achieved with such technology. The system is said to boost loading times, cut cycle times and optimise machine operation. It can be retrofitted onto an array of wheeled loaders and measures hydraulic pressures using up to four sensors. All signals are processed in the RDS Smart Box and the resultant weight calculation is sent to the terminal. There is a blend facility with an infinite number of mixes and products. GPRS or Wi-Fi connectivity provides one or two-way communication with the back office to send and receive job information.








%$Linker: 2 Asset <?xml version="1.0" encoding="utf-16"?><dictionary /> 2 92379 0 oLinkExternal www.LoupElectronics.com Loup Electronics web false /EasySiteWeb/GatewayLink.aspx?alId=92379 false false%>

For more information on companies in this article

Related Content

  • Simex’s patented technology changes screener size at the touch of a button
    January 6, 2017
    After two years of research and development, attachment manufacturer Simex has launched the VSE 40, a screening bucket with a patented mechanism that allows the operator to change the size of the screened material from the cab at the touch of a button. All similar products require eight to 10 hours’ work to change the setting, according to Simex’s assistant general manager Fereico Tamburri. “After we introduced our crushing bucket, we visited lots of crushing sites and found out that for all the screening b
    Read More
  • Simex’s patented technology changes screener size at the touch of a button
    April 15, 2013
    After two years of research and development, attachment manufacturer Simex has launched the VSE 40, a screening bucket with a patented mechanism that allows the operator to change the size of the screened material from the cab at the touch of a button. All similar products require eight to 10 hours’ work to change the setting, according to Simex’s assistant general manager Fereico Tamburri. “After we introduced our crushing bucket, we visited lots of crushing sites and found out that for all the screening b
    Read More
  • Hamburg wheel tracker leads three new testing machines from Gilson
    March 11, 2014
    Three key highlights gracing the new materials testing machines on display at Conexpo 2014 from Gilson Company are: its Hamburg Immersion Wheel Tracker, a Superpave Gyratory Compactor and a new version of the company’s Rotary Sifters. The Hamburg Wheel Tracker comes with stainless steel wheels (although rubber wheels are available as an option) and the machine has been put together to allow two specimens to be tested independently in a recirculating water bath. Control testing temperatures range between 20
    Read More
  • Cummins launches SCR only Stage IV/Tier 4 engines
    January 6, 2017
    Cummins used bauma to reveal the QSF3.8 – a four-cylinder engine platform delivering a power range of 63-89kW – which is ready to meet Stage IV/Tier 4 Final emissions regulations. Using only SCR for its exhaust after-treatment process, the QSF3.8 avoids the need for either DOC or DPF as a result of using a high-efficiency catalyst to convert oxides of nitrogen at lower exhaust temperatures while requiring only low doses of DEF, said the company.
    Read More

Highlighted Content