REBLOC barriers for Antwerp’s Oosterweel Link

Effective noise protection is an essential part of road infrastructure- both temporarily during construction and permanently along the finished road.
October 31, 2022 Read time: 2 mins
REBLOC’s noise and safety barrier system for Antwerp’s Oosterweel Link is 1.3km in length and includes 5,300m² of REBLOC NBL100X_400_5 barrier (image courtesy of REBLOC)

For one of the largest road infrastructure projects in Belgium, REBLOC, along with its local partner De Bonte Group, is providing free-standing concrete safety barriers with integrated noise barrier panels.

The solution is for the Oosterweel Link – Right Bank R1 – E19 project, around Antwerp. Rebloc was commissioned by TM ROCO, an association of Belgian construction companies and managed by LANTIS - set up by the Flemish government to ensure the smooth running of the Oosterweel Link project.

Oosterweel Link is a 15km motorway that will complete the city’s R1 ring road. Construction started in 2018 with all work on the ring road set for completion in 2030. The Antwerp ring road is a key part of the Trans-European Transport (TEN-T) Core Network, a European Union cross-border initiative to enhance major road and rail routes.

The barrier system from REBLOC is 1.3km in length and includes 5,300m² of REBLOC NBL100X_400_5 barrier, installed between the end of May and mid-June as a temporary sound barrier during construction works.

The construction of a conventional noise barrier is often complicated by various ground and underground installations, such as cables, drainage systems and various pipelines. But REBLOC offers free-standing concrete safety barriers with integrated noise barrier panels. This combination of noise and safety barrier is tested according to EN 1317-2 to meet the required safety and quality standards in Europe.

The noise barrier itself is tested for noise protection in accordance with EN 1793. This space-saving system offers solutions for containment levels H2 and H4b for total heights from 2-6m and above at a very slim overall width. Thanks to this combined system, REBLOC says that the noise barrier can be placed closer to the noise source, resulting in reduced height or an improved noise protection effect. Also, due to the system’s modular design, various highly absorbent panels made of wood-concrete, aluminum or acrylic glass can be combined to allow for numerous architectural design options.

REBLOC‘s space-saving systems leave more room for traffic lanes. The noise barrier can be moved quickly and easily - a great advantage for temporary application or when future road layout changes are planned.

For more information on companies in this article

Related Content

  • ERF abstract submission extension for 2014 Roadside Safety Design Conference
    June 18, 2014
    The European Union Road Federation (ERF) has extended the deadline for submission of abstracts for the 2014 edition of the AFB20(2) Roadside Safety Design Conference until 30 June 2014. The Conference on 5 November 2014 at the CEN headquarters in Brussels, Belgium will be the perfect opportunity for road safety experts around the globe to gather and exchange information concerning the latest trends and developments in the area of passive safety and road safety design. Abstracts should be a maximum two pag
    Read More
  • Pilosio builds up its formwork offering with the flying table ST80
    February 5, 2016
    Pilosio’s new flying table ST80 is ideal for high construction work where pouring cycles repeat from one level to another. Flying forms are constituted by large sections of formwork, featuring supporting trusses, joists and aluminum posts. This system is used to cast slab areas with tables that can be designed in order to reach up to lengths of 30m and widths of 6m. The system enhances also side flaps in order to handle spaces between columns and slab edges.
    Read More
  • Pilosio builds up its formwork offering with the flying table ST80
    January 6, 2017
    Pilosio’s new flying table ST80 is ideal for high construction work where pouring cycles repeat from one level to another. Flying forms are constituted by large sections of formwork, featuring supporting trusses, joists and aluminum posts. This system is used to cast slab areas with tables that can be designed in order to reach up to lengths of 30m and widths of 6m. The system enhances also side flaps in order to handle spaces between columns and slab edges.
    Read More
  • ERF organises successful road safety event
    May 31, 2013
    ERF organises successful event on Roadside Safety in cooperation with Transport Research Board. On 11 April, more than 90 participants from different parts of the world gathered in Brussels to attend the 2nd European Workshop of the TRB’s AFB 20 (2) Subcommittee on Roadside Safety. Coordinated by the European Union Road Federation and held at the CEN premises, the event proved a huge success. According to Konstandinos Diamandouros, ERF Head of Office and coordinator of the event, the feedback received from
    Read More

Highlighted Content