Skip to main content

Mobile LTL-M from DELTA

Danish company DELTA has been highlighting its new mobile retrometer, the LTL-M, which will measure line width and other geometry properties and also be able to monitor defective or missing road pavement markers. Measuring the retroreflectivity of road markings is essential to ensure high visibility, and thus traffic safety. But, according to DELTA, until now the measurements of retroreflectivity have mostly been done with hand-held instruments.
February 6, 2012 Read time: 2 mins
The LTM-prototype during the VTI field test
Danish company 199 Delta has been highlighting its new mobile retrometer, the LTL-M, which will measure line width and other geometry properties and also be able to monitor defective or missing road pavement markers.

Measuring the retroreflectivity of road markings is essential to ensure high visibility, and thus traffic safety. But, according to DELTA, until now the measurements of retroreflectivity have mostly been done with hand-held instruments.

It says that while such instruments are easy to use for making a limited number of measurements they are not optimal for monitoring long distances such as motorways: the road also has to be partly closed during measurements. As traffic increases, there is a growing demand for mobile measurement methods, which offer more safety for staff and drivers in traffic speed.

DELTA says that some existing mobile retrometers have limitations in accuracy and for this reason have until now only been used for screening purposes, while hand-held instruments are still needed for precise measurements if low values are screened, and for contractual disputes.

The company is now introducing its new mobile retrometer based on a new optical technology that has the same properties as used in its series of hand-held LTL retrometers.

"The objective for the development of the LTL-M has been to make a mobile retrometer that should be as easy to use and as accurate as a hand-held retrometer," says DELTA.

"Several laboratory and field tests performed by the Swedish Road Research Institute (VTI), comparing the LTL-M, an existing mobile retrometer and using a hand-held instrument as a reference, have shown that the LTL-M measures with accuracy similar to hand-held retrometers."

For more information on companies in this article

Related Content

  • A new additive for self-de-icing asphalt mixture roads in winter
    December 14, 2020
    A new additive from Iterchimica aims to help minimise icing on asphalt surfaces in winter conditions
  • Brisbane’s Airport: Innovative Management of One of the World’s Busiest Runways
    June 26, 2014
    When it comes to runways, there are few busier then Brisbane’s main runway. Servicing both domestic and international travel, with over 200,000 movements per year, operating without a curfew Brisbane’s main runway is the busiest in Australia. For maintenance, crews only have a limited period of time to determine the pavement condition, normally during the night, making the detection of pavement faults difficult. To resolve this issue, a new high speed pavement scanner was used to rapidly survey the pavem
  • New concrete testing technologies improve speed, safety and quality
    July 8, 2016
    Developments in data processing and management are revolutionising the way concrete strengths can be measured and used to improve efficiencies - Kristina Smith reports on two new technologies A new system that uses thermal imaging to measure the strength of sprayed concrete tunnel linings is being trialled for the first time in London. The brainchild of Dr Benoit Jones, managing director of Inbye Engineering, the technique could lead to improvements in safety, quality and – in the longer run – productivi
  • Advances in materials testing
    April 10, 2012
    Quicker, better, more cost effective materials testing - Kristina Smith writes. Most developments in materials testing technology involve updating and upgrading existing machines, either to meet changes to standards or to satisfy new needs in the market. And occasionally, a manufacturer will come up with something completely new. PUMA - the precision unbound materials analyser - falls into the latter category. It has been developed by Cooper Research Technology and Nottingham Transportation Engineering Cen