MOBA’s PAVE-IR system helps boost asphalt paving quality

The advanced PAVE-IR system from MOBA is said to help improve mat quality control during asphalt paving operations. This system is mounted on the paver and scans back and forth across the paving mat immediately behind the machine’s screed. Data on the thermal image of the mat is then displayed on a screen for the operator to see, as well as being recorded for documentation purposes and later analysis if required.
March 27, 2015 Read time: 2 mins
MOBA’s heat scanner allows for efficient paving processes

The advanced PAVE-IR system from 1228 MOBA is said to help improve mat quality control during asphalt paving operations. This system is mounted on the paver and scans back and forth across the paving mat immediately behind the machine’s screed. Data on the thermal image of the mat is then displayed on a screen for the operator to see, as well as being recorded for documentation purposes and later analysis if required.

The system allows the paver operator to see the temperature gradient across the mat and identify and cold spots that may cause further trouble. Areas falling in temperature can also be compacted first, so as to ensure they are rolled out while still in the workable heat zone. Problems with the mat can also be identified and dealt with early on.

The system uses an intelligent temperature scanner over the entire paving width of up to 12m to measure the temperature of the asphalt at up to 61 measurement points. The temperature profile is shown in real-time on a display. As a result, the operator can react at any time if irregularities occur.

In addition, the profile is stored with the GPS position data and transferred to a USB stick. Using a software, the contractor can evaluate and document the data in the office, can use it for planning subsequent work and to document the quality of his or her work. At the same time, this analysis can be used to better understand the whole process of road construction and to improve the quality in the long term.

For more information on companies in this article

Related Content

  • Laser scanning focuses on asset management
    January 9, 2015
    Laser scanners and improved data collection and analysis software are making light of asset management surveying. David Arminas reports The age of the laser scanner is upon us, taking over from traditional manual methods of surveying, data collection and processing. These new technical developments are making it much easier to process and use the data captured and are providing highways engineers with powerful tools to record, map and visualise their assets. This is good news for highways authorities
    Read More
  • Smart road surfacing in a tunnel
    August 19, 2022
    Smart road construction techniques have been used in the widest tunnel in Switzerland. Efficient operation and logistics were required for paving a width of 11.5m in the Gubrist Tunnel and contractor Marti AG Solothurn Bauunternehmung made good use of Vögele’s WITOS Paving Plus technology to optimise its work on the project.
    Read More
  • Brisbane’s Airport: Innovative Management of One of the World’s Busiest Runways
    June 26, 2014
    When it comes to runways, there are few busier then Brisbane’s main runway. Servicing both domestic and international travel, with over 200,000 movements per year, operating without a curfew Brisbane’s main runway is the busiest in Australia. For maintenance, crews only have a limited period of time to determine the pavement condition, normally during the night, making the detection of pavement faults difficult. To resolve this issue, a new high speed pavement scanner was used to rapidly survey the pavem
    Read More
  • Advances in US paving machines and material feeders
    May 30, 2013
    Paving machines vary considerably in North America compared with those units used elsewhere. On a worldwide basis, pavers with tamper bar screeds are popular having been developed in Europe and also favoured by Japanese and Chinese firms. But in the US the length of highways to be constructed resulted in a focus on high production pavers, which still continues today. North America and Latin America are key markets for these machines, with Australia being one of the few territories to employ both European an
    Read More

Highlighted Content