Milling versatility from Roadtec

Roadtec is now developing its RX600eLR milling machine as a more versatile unit for the 2m class. The machine has been unveiled in prototype form, with full testing set to commence shortly. A key development for the RX600eLR is that the drum is driven by two hydrostatic motors, with one mounted on each side.
April 12, 2016 Read time: 2 mins
Roadtec’s RX600eLR offers versatility for milling
1252 Roadtec is now developing its RX600eLR milling machine as a more versatile unit for the 2m class. The machine has been unveiled in prototype form, with full testing set to commence shortly. A key development for the RX600eLR is that the drum is driven by two hydrostatic motors, with one mounted on each side.

International marketing director Eric Baker said, “It can cut flush on both sides. It’s important for every market because you can’t go against traffic.” He explained that in most markets, road authorities do not allow construction machines to operate against the flow of traffic and added, “In right hand drive countries they’re fighting with that belt drive sticking out.”

The hydrostatic drives do provide benefits for the user. Baker said, “There are some advantages as you can adjust the speed infinitely and if you hit any obstructions, the hydrostatics can respond very quickly.”

He went on, “We built left hand flush cut machines before.” However this new design is more versatile and offers a much wider range of capabilities. With a standard machine it is possible to change the speed of the cutter drum by adjusting engine rpm but that approach has its limitations as it means there is a restriction on the power available. It is possible to change pulleys to adjust cutter drum speed, but this takes time and only allows a few speed options. Being able to adjust the speed infinitely allows the user to match the unit to the operating conditions. Power comes from a 196 Cummins diesel rated at 503kW and which meets Tier 4 Final/Stage IV emissions requirements.

This concept is more versatile and allows flush cutting alongside kerbs and New Jersey type barriers, no matter which side of the road vehicles drive on. And Baker continued, “We didn’t see the need for a slide on the cutter drum as we built the machine narrow enough and we can just crabsteer it around manholes. The drum housing is out past the outside of the machine and the tracks are set in a bit.”

The machine weighs around 30tonnes and can also be equipped with standard milling features including grade control and dust extraction.

For more information on companies in this article

Related Content

  • Power Pavers and Power Curbers are powering up production
    April 12, 2018
    Power Curbers and its sister company Power Pavers are both benefiting from increased demand for machines - Mike Woof writes Both Power Pavers and Power Curbers are experiencing strong demand from customers for new machines. Both firms have long order books at present, with an improved US market having helped unlock pent up demand from contractors that had deferred decisions to buy new units for some time. And both Power Curbers and Power Pavers are also benefiting from strong overseas sales also, to mark
    Read More
  • The use of concrete cutting tools and tips for users
    October 8, 2015
    Despite the proven importance of identifying metal targets and electrical lines before cutting into concrete, every day there are stories about mishaps that happen when the necessary reconnaissance is not done. In this article, a few firms that provide concrete scanning services weigh in on the critical importance of locating embedded and or buried obstructions by scanning for these features using ground penetrating radar (GPR). Also offered are tips for selecting the best GPR equipment and best practices f
    Read More
  • Dual speed control for the V-Maxx G2 hopper spreader from SnowEx
    November 7, 2017
    SnowEx’s latest hopper spreader, the V-Maxx G2, for ice control applications includes a dual variable-speed control more compact than on previous models. The manufacturers says that the digital, self-diagnosing control unit allows independent adjustment of spinner and auger speeds, while convenient buttons offer easy control of the standard vibrator and optional accessories. It includes an auto reverse function to easily clear auger jams. The control requires only a single four-pin wire to enter the cab,
    Read More
  • Asphalt milling machine gives a fine finish
    March 20, 2012
    High micro-milling results are said to be achievable using the new cutter from Roadtec. This product has been developed to meet the growing demand for thinner friction courses, which require proper surface preparation. Delamination of thin courses can occur when surfaces are prepared with conventional milling equipment, according to Roadtec. The firm adds that water can get trapped in the recesses of a conventionally milled surface, leading to premature pavement failure.
    Read More

Highlighted Content