Milling versatility from Roadtec

Roadtec is now developing its RX600eLR milling machine as a more versatile unit for the 2m class. The machine has been unveiled in prototype form, with full testing set to commence shortly. A key development for the RX600eLR is that the drum is driven by two hydrostatic motors, with one mounted on each side.
April 12, 2016 Read time: 2 mins
Roadtec’s RX600eLR offers versatility for milling
1252 Roadtec is now developing its RX600eLR milling machine as a more versatile unit for the 2m class. The machine has been unveiled in prototype form, with full testing set to commence shortly. A key development for the RX600eLR is that the drum is driven by two hydrostatic motors, with one mounted on each side.

International marketing director Eric Baker said, “It can cut flush on both sides. It’s important for every market because you can’t go against traffic.” He explained that in most markets, road authorities do not allow construction machines to operate against the flow of traffic and added, “In right hand drive countries they’re fighting with that belt drive sticking out.”

The hydrostatic drives do provide benefits for the user. Baker said, “There are some advantages as you can adjust the speed infinitely and if you hit any obstructions, the hydrostatics can respond very quickly.”

He went on, “We built left hand flush cut machines before.” However this new design is more versatile and offers a much wider range of capabilities. With a standard machine it is possible to change the speed of the cutter drum by adjusting engine rpm but that approach has its limitations as it means there is a restriction on the power available. It is possible to change pulleys to adjust cutter drum speed, but this takes time and only allows a few speed options. Being able to adjust the speed infinitely allows the user to match the unit to the operating conditions. Power comes from a 196 Cummins diesel rated at 503kW and which meets Tier 4 Final/Stage IV emissions requirements.

This concept is more versatile and allows flush cutting alongside kerbs and New Jersey type barriers, no matter which side of the road vehicles drive on. And Baker continued, “We didn’t see the need for a slide on the cutter drum as we built the machine narrow enough and we can just crabsteer it around manholes. The drum housing is out past the outside of the machine and the tracks are set in a bit.”

The machine weighs around 30tonnes and can also be equipped with standard milling features including grade control and dust extraction.

For more information on companies in this article

Related Content

  • Versatile articulated dump truck
    February 10, 2012
    Articulated dump trucks offers a versatile solution for earthmoving needs, Mike Woof reports. The articulated dump truck is now used worldwide in a huge array of earthmoving applications. The market for these versatile machines was developed largely in Northern Europe at first, before spreading to other areas of the world and ADTs can now be regarded as pieces of equipment with global appeal for earthmoving and extraction applications.
    Read More
  • Asphalt paving design advances
    June 15, 2012
    A diverse array of advanced paver designs is now being offered in the asphalt paving sector – Mike Woof reports With the World of Asphalt and INTERMAT 2012 events having both taken place in recent months, a series of innovations have been introduced for the asphalt paving market. Developments have come to market that widen the array of both US and European asphalt paving systems and all the major manufacturers have developed new pavers and materials feeders to meet the latest emissions requirements. Demand
    Read More
  • New driveline developments boost machine efficiency
    April 24, 2013
    Advances in transmission technology will help to optimise machine performance – writes Mike Woof. As construction machines have become more sophisticated, so have the transmission systems used in items of equipment. Advances in electronics and software in particular have allowed the development of integrated transmissions. These operate more efficiently and help optimise power delivery from an engine, boosting torque response and cutting fuel consumption and emissions at the same time. The smart electronics
    Read More
  • Smoother surfaces
    September 11, 2014
    Efficient new soil compaction machines featuring the latest technology are now coming to market – Mike Woof reports The start of 2014 has seen a major development for the construction equipment sector, with the Tier 4 Final emissions requirements at last beginning to take effect. The implications of the drive towards the introduction of low emission engine technology have been seen right across the off-highway machinery equipment industry, and the soil compaction segment is no exception.
    Read More

Highlighted Content